Keys Fitness KF-E4.0 owner manual Assembly for Upright Post, Assembly for Stationary Handlebars

www.keysfitness.com

3 Use Tool

D1-2

D

G1-1

G1

Use Tool

G2

R6

6mm

ASSEMBLY FOR UPRIGHT POST

Step 1:

5mm

H

D

G2

Insert the upright post cover (H) into the upright post (D) from the bottom side.

Step 2:

Connect the lower sensor wire (A2) with the upper sensor wire (D2).

R14 D2

R7

Step 3:	R13
Mount the upright post (D) to the main frame (A) and secure using 4 screws

(R7), 4 spring washers (R13), and 4 flat washers (R14).

Step 4:

Slide the upright post cover down to conceal tube connection.

ASSEMBLY FOR STATIONARY HANDLEBARS

Step 1:

A2

A

Connect the pulse wire (G1-1) from the left handlebar (G2) to the pulse wire (D1-2) from the upright post (D).

Step 2:

Attach the left stationary handlebar (G2) to the left handlebar mount on the upright post (D) and secure using screws (R6).

Step 3:

Repeat steps 1 and 2 for the right handlebar (G1).

8 Assembly