3D Connexion 137-40465-10 specifications Clone Mode Settings

15

	ATI Overlay Tab
Brightness	Use this slider to adjust the brightness of the video
	image.
Contrast	Use this slider to adjust the contrast in the video image.
	Use this slider to adjust the vividness of the color.
Saturation	Sliding it all the way to the left removes all color and
	produces a black and white picture.
Hue	Use this slider to adjust the pureness or tint of the red,
	green and blue components of the color.
Gamma	Use this slider to adjust the overall intensity of the video
	image.
Clone mode	Click this button to access Clone Mode overlay
options	settings.These settings only apply to video content when
(optional)	viewed in dual-controller Clone mode.
Defaults	This allows you to reset the Overlay settings to default
button	values.

Clone Mode Settings

	Clone Mode Options
Standard	Video content is displayed on your Primary display only.
	Video content is displayed on your Primary and
Theater Mode	Secondary displays. Video content is displayed on your
	Secondary display(s) is always in full screen mode.
	Note: your computer must be set for 16-bit color depth
	or higher to use this mode.
	Video content is displayed on your Primary and
Same on all	Secondary display is exactly the same manner. For
	example, all displays will show video output in full
	screen mode.
Theater Mode	These settings are available when Theater Mode is
Settings	selected.
	The aspect ratio of the source video is maintained for full
Same as	screen display. Note: that this option may result in black
source video	bars on either the horizontal or vertical sides of the video
	display.