Life Fitness X9i manual 2PA 2PB

Step 1

Before proceeding, familiarize yourself with the parts of the Cross-Trainer and make sure that you have received all the items described in the Parts List.

Step 2

Locate the left and right FRONT COVER (#9, #10).

Usign two PHILLIPS PAN HEAD SCREWS (#3), mount the USER LEFT FRONT COVER (#9) to the FRAME

(A). Attach the USER RIGHT FRONT COVER (#10) to the FRAME in the same manner using two PHILLIPS PAN HEAD SCREWS (#3). Secure the tops of the FRONT COVERS together using two PHILLIPS PAN HEAD SCREWS (#3).

11

18

C

Step 3

12Locate the RIGHT USER ARM (#12). Snap the 2-PIN CONNEC- TOR (2PA) located at the bottom of the RIGHT USER ARM into the 2-PIN CONNECTOR (2PB) positioned at the top of the RIGHT ROCKER ARM (B). Feed the connectors and excess cable up into the RIGHT USER ARM. Secure the RIGHT USER ARM to the RIGHT ROCKER ARM using three HEX SOCKET HEAD CAP

SCREWS (#1) and INTERNAL TOOTH LOCK WASHERS (#18).

1 Repeat the procedure for the LEFT USER ARM (#11) and LEFT ROCKER ARM (C). Tighten all screws securely.

2PA	CAUTION: BE CAREFUL NOT TO PINCH THE WIRE
2PB	HARNESSES WHEN ASSEMBLING THE USER ARMS
	(#11 & #12) TO THE ROCKER ARMS (B & C).

MISE EN GARDE : VEILLEZ À NE PAS PINCER LE

B FAISCEAU DE CÂBLES LORS DE L'ASSEMBLAGE

DES POIGNÉES MOBILES (Nº 11 et 12) ET DES BRAS BASCULANTS (B ET C).