Using the CD Player
To Unload a CD
Press the 0 button on the Unit to eject a CD. The CD is ejected automatically, then take out the CD.
(when the Unit is placed horizontally)
(when the Unit is placed vertically)
Basics of Using the CD Player
— Normal Play
To Play a CD
1Insert a CD.
2Press the 3¥8 button.
The first track of the CD begins playing.
Track number | Playback time |
•The CD Player automatically stops when the last track of the CD has finished playing.
To stop playing the CD, press the 7 button. The following information for the CD is displayed.
Total track number Total playback time
To stop playing and remove the CD, press the 0 but-
ton on the Unit.
To pause, press the 3¥8button. The playback time blinks on the display.
To cancel pause, press the same button again. Play con- tinues from the point where it was paused.
To Select a Track or Passage within a Track
In the stop mode or during playback, press the Number but- ton on the Remote Control to select the track you want.
•The selected track starts playing.
•For the track number more than 10, press the +10 button then the Number button.
OR
During playback, press the 4 or ¢ button to select the track you want.
•The selected track starts playing.
•Press the ¢ button once to skip to the beginning of the next track.
•Press the 4 button to skip to the beginning of the track being played. Press twice quickly to skip to the beginning of the previous track.
Search Play
Holding down the 4or ¢button, during playback, will fast forward/backwards the CD so you can quickly find a particular passage in the track you are listening to.
•The < or > and or buttons on the Remote Control operate same as the 4 or ¢ button does.
Programming the Playing Order of the Tracks
(Using the Remote Control)
You can program the playing order of the tracks.
■You can program up to 32 tracks in any desired order in- cluding the same tracks.
■You can only make a program when the CD Player is stopped.
1Insert a CD.
2Press the 3/8 button.
3Press the 7 button to stop the CD.
4Press the PLAY MODE button on the Remote Control until the “PROGRAM”
indicator lights up.
PLAY MODE
PROGRAM
(To be continued on the next page)
19