JVC SP-VSDT2000, CA-VSDT2000, SP-PW2000 manual Troubleshooting, Symptom

Page 29

Troubleshooting

•If you are having a problem with your System, check this list for a possible solution before calling for service.

•If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Poor radio reception

The CD skips.

The CD does not play.

Unable to operate the Remote Control.

Operations are disabled.

“CD NO DISC” appears.

“CANNOT PLAY” or “UNFINALIZ” appears.

The characters and symbols on the display appear upside down.

Subwoofer automatically turns on, but no sound is output.

Subwoofer does not automatically turn on.

Possible Cause

•Connections are incorrect, or loose.

•Headphones are connected.

•The antenna is disconnected.

•The AM Loop Antenna is too close to the System.

•The FM Wire Antenna is not properly extended and positioned.

The CD is dirty or scratched.

The CD is upside down.

•The path between the Remote Control and the sensor on the Unit is blocked.

•The batteries have lost their charge.

The built-in microprocessor has malfunctioned due to external electrical interference.

There is no disc loaded.

•The CD-R or CD-RW that hasn’t yet been finalized (including blank discs) has been inserted.

•The disc has been inserted with its label side down.

The DISP.SET switch on the rear panel of the Center Unit has not been set correctly.

The volume knob of the Subwoofer is set to MIN position.

The volume knob of the Subwoofer is set to MIN position. Also, the volume level of the Center Unit is low.

Action

•Check all connections and make corrections. (See pages 4 to 8.)

•Disconnect the headphones.

•Reconnect the antenna securely.

•Change the position and direction of the AM Loop Antenna.

•Extend FM Wire Antenna to the best reception position.

Clean or replace the CD.

Put the CD in with the label side up.

•Remove the obstruction.

•Replace the batteries.

Unplug the System then plug it back in.

Insert a disc.

•Insert a CD-R or CD-RW that has been finalized.

•Remove the disc and insert it with the label side front or up. (See page 18.)

Set the DISP.SET switch correctly. (See page 10.)

Adjust the volume knob.

Adjust both volume levels.

26

Page 28 Page 30
Image 29
Page 28 Page 30
Contents VS-DT2000 For U.S.A Mises en garde, précautions et indications diversesFor Canada/pour le Canada Cauation Power switch! SP-PW2000How This Manual Is Organized FeaturesIntroduction Table of Contents Getting Started AccessoriesHow To Put Batteries In the Remote Control Using the Coaxial Type Connector Not Supplied Connecting the FM AntennaUsing the Supplied Wire Antenna AM loop antenna can be attached to a wall Connecting the AM AntennaConnecting the Speakers SP-VSDT2000 Attaching the Spacers Connecting the Powered Subwoofer SP-PW2000Connecting External Equipment Installing the Unit on the Stand Connecting an MD Recorder, etc Digital OutputConnecting the AC Power Cord Example of attachment Center Unit Installing the Equipment on the WallExample of attachment Speakers Changing the Display and Control Buttons SettingsWhen the Unit is placed vertically Compu Play Using the Remote ControlBasic Operations Turning the Power On and OffAdjusting the Brightness Dimmer Changing the Color Color Adjusting the VolumeTone Control BASS/TREBLE Showing the Time DisplayOperating the Powered Subwoofer Using the Powered SubwooferPresetting the Volume Adding the Richness to the Bass PhaseINPUTLOW-LEVEL Input TerminalsTuning In a Station Using the TunerSelect a station using one of the follow- ing methods One Touch RadioManual Presetting Presetting StationsTo Change the FM Reception Mode To change the preset stations, repeat the samePress the % button Using the CD PlayerTo Insert a CD To Unload a CD Basics of Using the CD Player Normal PlayTo Play a CD Search PlayRandom Play To Modify the ProgramRepeating Tracks Child LockRecording the System’s Source to External Equipment Using External EquipmentListening to External Equipment Setting the Clock Using the TimersPress the CLOCK/TIMER button on the Remote Control Press the ¢ or 4 button on Remote Control to set the hourSetting the on time Example AM Setting the Daily TimerSetting the OFF time Example PM Setting the volume levelPress the % button to turn off the Sys- tem Setting the Sleep TimerCleaning the unit Care And MaintenanceCompact Discs General NotesSymptom TroubleshootingPage Page CA-VSDT2000 Specifications

SP-VSDT2000, SP-PW2000, CA-VSDT2000 specifications

The JVC CA-VSDT2000, SP-PW2000, and SP-VSDT2000 are key components of JVC's impressive audio and video system designed to enhance the overall entertainment experience in home theater setups. These models are tailored to provide superior sound quality, versatile connectivity options, and cutting-edge technology.

The CA-VSDT2000 is a powerful component that serves as the heart of the audio system. Equipped with a robust amplifier, it delivers high output power, which is essential for driving high-performance speakers like the SP-PW2000 and SP-VSDT2000. The amplifier features advanced digital signal processing technology, enabling it to deliver clear, immersive sound across a wide frequency range. Whether you are listening to music or watching movies, the CA-VSDT2000 ensures that every detail is accurately rendered, providing viewers with an engaging audio experience.

The SP-PW2000 is a standout subwoofer that brings deep, resonant bass to your audio experience. Its design incorporates a large driver and reinforced cabinet construction, minimizing distortion while maximizing sound output. The subwoofer features adjustable crossover frequency settings, allowing users to fine-tune the bass response to match their room acoustics and personal preferences. With its powerful low-frequency performance, the SP-PW2000 is ideal for action-packed films and music genres that demand robust bass.

On the other hand, the SP-VSDT2000 is a satellite speaker designed to complement the CA-VSDT2000 and SP-PW2000. Constructed with high-quality materials, it ensures durability while delivering crisp and detailed mid and high frequencies. The speaker's compact design allows for flexible placement in various room configurations, making it easy to create a surround sound environment. With the ability to handle a wide dynamic range, the SP-VSDT2000 excels at producing clear vocals and nuanced instrumentals.

Together, these components exemplify JVC's commitment to audio excellence. With features like advanced connectivity options, including HDMI, optical, and coaxial inputs, users can seamlessly integrate their favorite devices for a comprehensive multimedia experience. The combination of advanced technology, superior craftsmanship, and user-friendly design in the JVC CA-VSDT2000, SP-PW2000, and SP-VSDT2000 makes these products essential for any home theater enthusiast seeking to elevate their audio enjoyment.
Top Page Image Contents