JVC SP-UXA7DVD To select the output signal type-Step, Guidelines to select the output signal type

To select the output signal type—Step 3:

If you connect audio equipment to the DVD OPTICAL DIGITAL OUT terminal, you need to select the type of digital signals output through the terminal according to the particular kind of audio equipment.

1 Press Cursor 5 to move to “DISPLAY.”

MONITOR TYPE		4:3 LB
SCREEN SAVER		MODE 2
ON SCREEN GUIDE		ON
		EXIT
PRESS	KEY

2 Press Cursor 2 to move to “AUDIO.”

The AUDIO menu appears on the TV.

DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lo / Ro
COMPRESSION
		ON
			EXIT
	PRESS KEY

3 Press Cursor ∞ to move to “DIGITAL AUDIO

OUTPUT.”

DIGITAL AUDIO OUTPUT		STREAM/PCM
DOWN MIX		Lo / Ro
COMPRESSION
		ON
			EXIT
	PRESS KEY

4 Press Cursor 3/2 to select the output signal type.

Select the output signal type according to the guidelines on the right column.

To exit from the setting menu, press CHOICE while

holding down SHIFT. The setting menu goes off.

•You can also exit from the setting menu by pressing Cursor 5/∞ to select EXIT in the menu, then press

ENTER.

7Guidelines to select the output signal type

Selectable types: STREAM/PCM, PCM ONLY,

DOLBY DIGITAL/PCM

•STREAM/PCM:

Select when connecting an amplifier or a decoder compatible with DTS, Dolby Digital and MPEG Multichannel.

•PCM ONLY:

Select when connecting an amplifier compatible only with Linear PCM or a digital recording device such an MD recorder, DAT deck, etc.

•DOLBY DIGITAL/PCM:

Select when connecting an amplifier or a decoder compatible only with Dolby Digital.

Output Signals Through the DVD OPTICAL DIGITAL OUT Terminal

Playback		Output signals
				DOLBY DIGITAL/
disc	STREAM/PCM		PCM ONLY
				PCM
DVD with	48 kHz,
48 kHz,
	16 bit
16 bit
	Linear PCM
Linear PCM
DVD with	48 kHz,
48 kHz,
	20/24 bit
20/24 bit
	Linear PCM
Linear PCM
DVD with
96 kHz,	No output
Linear PCM
DVD with	Dolby Digital		48 kHz,	Dolby Digital
			16 bit
Dolby Digital	bitstream			bitstream
			Linear PCM
DVD with DTS	DTS bitstream		No output
DVD with	MPEG		48 kHz,
MPEG			16 bit
	bitstream
Multichannel			Linear PCM
SVCD/VCD/	44.1 kHz,
	16 bit
Audio CD
	Linear PCM
Audio CD with
DTS Digital	DTS bitstream
Surround
MP3 disc	No output

When “PCM ONLY” or “DOLBY DIGITAL/PCM” is selected as the output signal type

The sound signals of DTS are not output from the DVD OPTICAL DIGITAL OUT terminal.

To listen to the sound of DTS on audio equipment connected to the terminal, select “STREAM/PCM” as the output signal type.

When “PCM ONLY” is selected as the output signal type

Also set “DOWN MIX” in the AUDIO menu. (See page 57.)

16