Mounting Screen Controller
|
|
1.Remove backing from neoprene mounting pad and place either vertically or horizontally around equipment handrail as appropriate as shown below.
2.Insert two nylon wire ties (provided) through the bottom holes in the mounting bracket on the rear of the Screen Controller.
3.Attach wire ties as tightly as possible around the horizontal or vertical bar so the controller can’t be rotated. This is very important to keep moisture out of the controller and to keep from damaging the electronics inside unit.
ΝΟΤΕ: Do not place controller where it would interfere with the cardio unit controls or display panel. The Screen Controller mounting bracket may be removed with pliers and mounted with Super Lock Velcro to any flat surface.
10