Cable Management System, Installation Instructions

Cable Management System

The Optional Cable Management System is used to cover the antenna cable and power cords that run between the individual stands. It consists of a metal bracket that connects to the bottom of the monitor stand and a plastic two-channel extrusion that can be cut to length with common hand tools.

5 foot Cable Management extrusion.

Cable Management	Bottom view of bracket
Mounting bracket	mounted with four screws

Installation Instructions

Step 1

After monitors are mounted to stands and the proper spacing between equipment has been determined, measure distance between stands and cut Cable Management extrusion to length.

Step 2

Remove Allen Head screw from plastic bottom cover of stand. Place mounting bracket over same hole and re-install the Allen Head screw.

Step 3

Place Cable Management extrusion into end of bracket and install 4 self tapping screws, two on each side of bracket.

Repeat on opposite side of extrusion.