2:Pull Audio/Video and 12 Volt Power cable wires through hole in DVD bracket and attach bracket to stand with 2 hex screws provided.
IMPORTANT: When attaching Short Version, confirm that the large square opening on the rear of the bracket is positioned on the right side of the stand tube as shown.
Short Version | Long Version |
3:Plug Audio Video cable into the Video & Audio “Output” on the rear of the DVD player.
4:Plug 12 Volt Power cable into 12 Volt input on rear of DVD player.
5:Remove two security screws from top of DVD player. Attach DVD player to bracket with 4 Phillips screws provided.
Short Version | Long Version |
Attach back cover with 4 Phillips screws provided.
6