Precor UBK 800 warranty To thread the cable assembly

30 Assembling and Maintaining UBK 800-Series Upright Exercise Bikes

To thread the cable assembly:

1.Make sure that as much of each cable as possible passes through the opening in the middle of the console mount on the base unit.

2.Position the console over the console mount.

3.Rest the console on the console mount so that the notch on the bottom of the console’s back plate rests on the rectangular hook at the bottom of the console mount, as shown in the following figure.

Figure 16: Console positioning on base unit

4.Tilt the console forward until it stops. Use one hand to steady the console in this position, or ask your assistant to do so.

5.Pull all cables upward and forward until you can drape them over the top of the console’s back plate.