SET
SET
ENTER
CD REC
START
5.Press the cursor key up or down (Á or 1) and select the disc.
The display changes with each press of the cursor keys as shown below.
+ Press the down ( | 1) cursor key | CD =TAPE | |
AUTO EDIT | |||
|
| ||
3 ï 2 ï 1 | TAPE | ||
| |||
Press the up (Á | ) cursor key = |
|
•If you press the DISC
6. Press the SET button.
After “TAPE C - | CD =TAPE |
display shows you the length of tape required to | AUTO EDIT |
TAPE | |
| |
record the CD you selected. | \ |
• You can select a different length of tape, | |
depending on the actual size of the tape you |
|
are using, from eleven possibilities programmed |
|
into the System: 40, 46, 50, 54, 60, 64, 70, 74, | CD =TAPE |
80, 84, 90. Use the 4 or ¢key to | AUTO EDIT |
TAPE | |
|
select the length that matches the length of tape
you will be using, or the length nearest to the length you will be using.
•If you pick a tape length shorter than the total playing time of the CD, the last tracks on both sides of the tape will be faded out as the tape ends.
7.Press the SET button.
will be recorded on side B of the tape are displayed.
5 6 7 8 | CD =TAPE |
AUTO EDIT | |
• To display the tracks that will be recorded on | TAPE |
side A of the tape, press the SET button again.
The Unit switches between side A and side B with each press of the SET button.
8.Press the ENTER button.
9.Insert a cassette in Tape Tray to record on.
When you want to record on both sides of a tape, press the REVERSE MODE button to turn Reverse mode on.
10.Press the CD REC START button.
The Unit plays the CD and starts recording. If the tape has not been rewound, the Unit rewinds the tape before starting to record the CD.
When the tape is ready, to prevent the start of a track being cut, the System creates a blank period of about 10 seconds before it starts to record the CD. While a blank period is being created, “TAPE
When the recording is finished, the message “CD REC FINISHED” scrolls by on the display. The CD Player and Cassette Deck stop.
To stop at any time while recording, press the REC START/STOP button or the 7button. The recording stops when you press the REC START/STOP button. If you press the 7button, the unit creates a four second blank section of tape before stopping.
To cancel Auto Edit, press the 0 button on the CD Player or the ALL CD EJECT button. You can also cancel Auto Edit by selecting play mode from the Unit or the Remote Control after stopping the recording.
Notes:
•If you change any of the CD’s while using Auto Edit, Auto Edit will be cancelled. Therefore, do not change the CD’s while using Auto Edit.
•When making SLEEP timer settings while doing Auto Edit recording, set the time so that there is enough leeway to finish the recording before the power goes off. If the time is set to about the length
of the CD, the power may go off before recording finishes.
English
41