ProForm PFTL99507.1 user manual Information Mode, Optional Chest Pulse Sensor

Page 19

THE INFORMATION MODE

The console features an information mode that allows you to select a unit of measurement for the console, turn on or turn off the display demo mode, and change the contrast of the display.

To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will appear in the dis- play:

The display will show the selected unit of measure- ment. To change the unit of measurement, press the Speed increase button. To view distance in miles, se- lect ENGLISH. To view distance in kilometers, select

METRIC.

The console features a display demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the reset/off circuit breaker to the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the but- tons will not function. If the demo mode is turned on, the word “ON” will appear in display while the informa- tion mode is selected. To turn on or turn off the demo mode, press the Speed decrease button.

To adjust the contrast of the display, press the Incline in- crease and decrease buttons.

To exit the information mode, remove the key from the console.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor offers hands-free oper- ation as it tracks your heart rate during your workouts.

To purchase the optional chest pulse sensor, call the telephone number on the front cover of this manual.

HOW TO ADJUST THE CUSHIONING SYSTEM

Remove the key from the console and unplug the power cord. The treadmill features a cushioning sys- tem that reduces the impact as you walk or run on the treadmill. To increase the firmness of the walking plat- form, step off the treadmill and slide the platform cush- ions toward the front of the treadmill. To decrease the firmness, step off the treadmill and slide the platform cushions toward the back of the treadmill. Note: Make sure that both cushions are set at the same firm- ness level. The faster you run on the treadmill, or the more you weigh, the firmer the walking plat- form should be.

Platform

 

Cushion

 

 

Increase

Decrease

Platform

 

 

Cushion

 

Walking Platform

19

Image 19
Contents On the WEB QUESTIONS?Please do not Contact Call TOLL-FREETable of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unplugged Tighten the Nut the Wheel must turn freely Careful not to pinch the Upright WireNot fully tighten the Bolts yet Not fully fold the Frame yetBolts and then tighten them Be careful not to pinch the wiresPage Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerAvoid moving Your hands Follow your progress with the displayMeasure your heart rate if desired Stand on Foot railsFollow your progress with the display. See on HOW to USE a Personal Trainer WorkoutSelect a personal trainer workout Press the Start button to start the workoutSelect the iFIT Competition Training Center HOW to USE the Ifit Competition Training CenterEnter user information HOW to USE the Settings ModeSelect the settings mode Measure your heart rate if desired. See onHOW to Adjust the Cushioning System Information ModeOptional Chest Pulse Sensor HOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Page Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description R1207AQty Exploded Drawing A-Model No. PFTL99507.1 R1207A Exploded Drawing B-Model No. PFTL99507.1 R1207A Exploded Drawing C-Model No. PFTL99507.1 Exploded Drawing D-Model No. PFTL99507.1 R1207A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT