JVC RX-668VBK manual Release VCR Power, Try to operate your VCR by pressing VCR Power

Page 37

To change the transmittable signals for operating another manufacturer’s VCR

To change the transmittable signals for operating a CATV converter or satellite tuner

1.Press and hold VCR POWER.

2.Press VCR.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a JVC product, press 0, then 1.

For a FUNAI product, press 1, then 0.

4. Release VCR POWER.

Following button can be used for operating the VCR:

VCR POWER Turns on and off the VCR.

After pressing VCR, you can perform the following operations on the VCR:

CH +/–

Changes the TV channels on the VCR.

3

Starts playback.

1

Rewinds a video tape.

`

Fast winds a video tape.

7

Stops operation.

8

Pauses. To resume playing, press 3.

REC PAUSE:

Pauses recording temporarily.

Note:

Refer to the manual supplied with your VCR.

5. Try to operate your VCR by pressing VCR POWER.

When your VCR turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of VCR,

try each one until the correct one is entered.

Manufacturer

Codes

Manufacturer

Codes

 

 

 

 

EMERSON

11

RCA

05, 06

FUNAI

10, 14, 15, 16

SAMSUNG

24

GOLD STAR

12

SANYO

21, 22, 23

 

 

 

 

HITACHI

04

SHARP

27, 28, 29

JVC

01, 02, 03

SONY

18, 19, 20

MITSUBISHI

13

SHINTOM

30

NEC

25

TOSHIBA

26

PANASONIC

07, 17

ZENITH

08

PHILIPS

09

 

 

 

 

 

 

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

1.Press and hold CATV/SAT POWER.

2.Press CATV CONTROL.

3.Enter manufacturer’s code (two digits) using

buttons 1–9, and 0.

See the list below to find the code.

Examples: For a PIONEER product, press 1, then 3. For a SONY product, press 2, then 0.

4. Release CATV/SAT POWER.

Following button can be used for operating the CATV converter or the satellite tuner:

CATV/SAT POWER Turns on and off the CATV converter or satellite tuner.

After pressing CATV CONTROL, you can perform the following operations on the equipment:

CH +/–

Changes the channels.

1 – 9, 0, 100+ (+10)

Selects the channel.

 

100+ (+10) button will function as the

 

ENTER button if your equipment

 

requires pressing ENTER after

 

selecting a channel number.

RETURN

Alternates between previously

 

selected channel and the current

 

channel.

Note:

Refer to the manual supplied with your CATV converter or satellite

tuner.

5. Try to operate your CATV converter or satellite tuner by pressing CATV/SAT POWER.

When your CATV converter or satellite tuner turns on or off, you have entered the correct code.

If there are more than one code listed for your brand of

CATV converter or satellite tuner, try each one until the correct one is entered.

Manufacturer

Codes

GI JERROLD

01, 02, 03, 04, 05,

 

06, 07, 08

 

 

HAMLIN/REGAL

15, 16, 17, 18

 

 

PIONEER

13, 14

SCIENTIFIC ATRANTA

09, 10

ZENITH

11, 12

 

 

RCA

19

SONY

20

Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RX-668VBK RX-668VBK Table of Contents Parts Identification Remote ControlFront Panel To use the Cursor control buttons q on the front panelConnecting the FM and AM Antennas Before InstallationChecking the Supplied Accessories Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers Connecting the rear and center speakersConnecting the subwoofer speaker Connecting Audio/Video ComponentsAudio component connections Video component connections Putting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelMuting the Sound Selecting the Front SpeakersRecording a Source Adjusting the Front Speaker Output Balance Attenuating the Input SignalAdjusting the Tone Reinforcing the BassPress Setting so that the cursor Setting Center and Rear Speakers for DSP ModesChanging the Source Name Press TAPE/MDAdjust the sound using the functions listed above Using the Sleep TimerPress ONE Touch Operation Using Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Press FM/AM to select the bandTo tune in a preset station Press 10 keys to select a preset channel numberWhen an FM stereo broadcast is hard to receive or noisy Press FM/AM3D-PHONIC modes Using the DSP ModesDAP modes Surround ModesFront Available DSP Modes According to the Speaker ArrangementRear Rear SpeakerAdjusting DAP Digital Acoustic Processor Modes Adjusting the 3D-PHONIC ModesUntil the mode PRO Logic Or Theater appears on Display Press Rearl / + to adjust the rear speaker output levelPress Test to check the speaker Output balanceTo cancel the DSP mode Press Surround repeatedly Until the DSP mode you wantActivating the DSP Modes Select and play a sound sourceActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeUsing the On-Screen Menus Adjusting the DVD Multi Playback Mode Adjusting the DSP ModesPress any one of %/ Þ/ @/ # Press %/ Þto move to Surround LEVEL, then press @/ #Press % / Þto move to SETTING, then press @/ # Press % / Þ/ @/ #to adjust the tone as you wantPress %/ Þto move To Preset MEMORY, then press @/ # Press any one of % / Þ / @/ #Remote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Automatic Source SelectionCD player MD recorder Text Compu Link Remote Control SystemDisplaying the Disc Information on the TV screen Disc Search Only for CD PlayerShowing the Disc Information on the TV Screen Press Text Display while CD or MD is selected as the sourceTo exit from the Disc information screen Press %/ Þto move To SEARCH, then Press OSD SET Press Text Display while CD is selected as the sourcePress %/ Þto move To Performer Then press OSD SET Press OSD SET againPress %/ Þto move To GENRE, then Press OSD SET Press %/ Þto move To Search Then press OSD SETPress %/ Þto move To Title INPUT, then press OSD SET Entering the Disc InformationEnter the disc title, referring to steps 3 Up to 32 characters to this User FilePress %/ Þto move to the genre you want, then press OSD SET Press Text Display while MD is selected as the sourceWhen turning on the TV for the first time after AV Compu Link Remote Control SystemVolume to the minimum using the TV volume AC outletsAutomatic Power On/Off Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayTuner Operating JVC’s Audio/Video ComponentsSound control section Amplifier CD playerMD recorder Cassette deckDVD player Try to operate your TV by pressing TV Power Release TV PowerIf there are more than one code listed for your brand of TV Operating Other Manufacturers’ Video EquipmentTry to operate your VCR by pressing VCR Power Release VCR PowerRelease CATV/SAT Power Manufacturer CodesProblem Possible Cause Solution TroubleshootingWatts per channel, min. RMS, driven into SpecificationsOhms, 40 Hz to 20 kHz with no more than 0.8% Total harmonic distortionAM tuner FM tuner IHFGeneral Valley Road Wayne, NJ 781 954 6501098 Limited Warranty AUDIO-2 1298HIMMDWJEM

RX-668VBK specifications

The JVC RX-668VBK is a versatile and robust A/V receiver designed to meet the needs of home theatre enthusiasts. With its blend of advanced features and impressive sound quality, this receiver is suitable for both casual viewers and audiophiles alike. It is packed with technologies that enhance listening experiences, making it a popular choice among consumers.

One of the standout features of the RX-668VBK is its powerful amplification capabilities. It delivers 100 watts per channel into 8 ohms, providing enough power to drive a variety of speaker setups. This level of power ensures rich, dynamic sound reproduction suitable for everything from music playback to movie watching. The receiver supports surround sound formats, including Dolby Digital and DTS, allowing for an immersive audio environment that draws viewers deeper into their favorite films.

In terms of connectivity, the JVC RX-668VBK boasts an array of inputs and outputs. It includes multiple HDMI ports, facilitating easy connections to modern devices such as Blu-ray players, gaming consoles, and streaming devices. The receiver supports 4K pass-through, ensuring that it can keep up with the latest video formats and resolutions, thus future-proofing your home entertainment system.

Furthermore, the RX-668VBK integrates various audio technologies that enhance sound quality. The built-in DSP (Digital Signal Processing) allows users to select different sound modes tailored for movies, music, or gaming, providing flexibility for different types of content. The receiver also features a comprehensive equalizer that enables users to optimize sound profiles based on personal preferences and room acoustics.

One notable aspect of the RX-668VBK is its user-friendly interface. The on-screen display and intuitive remote control make it easy to navigate through settings and options, ensuring a seamless experience for users of all technical levels. Additionally, the receiver is equipped with a sleep timer and programmable memory functions, enhancing convenience during use.

Overall, the JVC RX-668VBK is a comprehensive A/V receiver that combines robust power, advanced audio technologies, and versatile connectivity options. Its excellent sound quality and user-friendly features make it an attractive option for both home cinema setups and music lovers, ensuring that it meets the demands of today's audio-visual landscape. With the RX-668VBK, JVC continues to establish its reputation as a reliable brand in the home entertainment market.
Top Page Image Contents