Assembly

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.


Assembly requires the included hex keys		and your own phillips screwdriver		,
adjustable wrench	and wire cutters		.

For help identifying assembly hardware, see the drawings below. Note: The assembly hardware and other small parts are packaged in separate part bags. If a part is not in the part bags, check to see if the part has been preattached. To avoid damaging plastic parts, do not use power tools for assembly.

1/4” Star Washer (92)–4	3/4” Screw (6)–2	3/4” Tek Screw (47)–4
1/4” Star Washer (92)–4	Wheel Nut (21)–2
5/16” x 1” Bolt	1/4” x 1” Bolt	Wheel Bolt (107)–2
(122)–4	(71)–4
	4” Bolt (112)–2

1.With the help of a second person, carefully raise the Uprights (109) to the position shown.

Insert one of the Extension Legs (105) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (100) is beneath it. Note: It may be helpful to tip the Uprights (109) forward as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

109

105

100