ProForm PFTL91206.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 19

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the lowest position; if you do not do this, you may perma- nently damage the treadmill. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1. Hold the treadmill in the locations shown at the right. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than with your back.

Raise the frame about halfway to the vertical position.

2.Hold the treadmill frame firmly with your left hand. Using your right hand, pull the latch knob to the right and hold it. Raise the treadmill until the pin on the latch knob is aligned with the hole in the left handgrip. Then, release the latch knob. Make sure that the latch knob is fully released so the pin is fully inserted into the hole in the left handgrip. Note: After a period of use, the latch housing may need to be adjusted to align the pin with the hole in the left handgrip (see assembly step 5 on page 8).

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure the pin on the latch knob is fully inserted into the hole in the left handgrip.

1.Hold the treadmill and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls on the wheels. Carefully move the treadmill to the desired location. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until the base is resting in the storage position.

 

Latch

Handgrip

Knob

 

Latch

 

Knob

 

Pin

Pin

 

Frame

Handgrip

 

 

Base

 

Wheel

19

Image 19
Contents Model No. PFTL91206.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Back Before YOU BeginRight Side Assembly Bolts, tighten them Page Page Treadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerMeasure your heart rate if desired Speed display-ThisCalories/Pulse Time/Pace displaySelect a preset program HOW to USE a Preset ProgramPress the Start button to start the program Monitor your progress with the displays Select a heart rate program HOW to USE a Heart Rate ProgramMonitor your progress with the displays Optional Chest Pulse Sensor Information MODE/DEMO ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Problem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked onExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches Page Qty Description R0906ADescription Exploded Exploded Drawing B-Model No. PFTL91206.0 R0906A Exploded Drawing C-Model No. PFTL91206.0 R0906A Exploded Drawing D-Model No. PFTL91206.0 R0906A Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT