ProForm PFTL58580 user manual Assembly

Page 5

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the small parts used in assembly. Assembly requires the included allen wrench and your own phillips screw-

driver , adjustable wrench , and scissors .

1.Refer to the drawing on page 4 and identify the right side of the treadmill. With the help of a second person, carefully lay the treadmill on its right side.

Firmly slide an Extension Leg (59) into one side of the Base (32). Make sure that the Extension Leg is turned so the bracket is on the side shown. Using the Allen Wrench (102), tighten an Extension Leg Screw (57) into the Extension Leg and the Base. Without turning the treadmill over, attach the other Extension Leg in the same manner.

Stand the treadmill upright so that both Extension Legs (59) are resting flat on the floor.

2.Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions in step 2 to lower the treadmill.

Cut the plastic ties holding the cage nuts in the upper end of each Handrail (60, 62).

Position the Left Handrail (60) on the left Upright (32) as shown. The bracket on the Extension Leg (59) should be inside of the lower end of the Left Handrail. Thread two Handrail Bolts (30) with a Handrail Washers (31) into the left Upright and the Left Handrail. Do not tighten the Handrail Bolts yet.

While another person holds the Console Base (46), at- tach the Right Handrail (62) in the same way. Be care- ful to avoid damaging the Wire Harness (35).

3.Set the Console Base (46) on the Handrails (60, 62). Route the Wire Harness (35) under the Console Base as shown and then press the Wire Harness up into the Console Base. Insert any slack into the Right Handrail (62).

Attach the Console Base (46) to the Handrails (60, 62) with four Screws (29).

1

 

57

102

 

 

 

32

 

 

 

59

 

 

 

Bracket

 

 

2

 

 

46

 

 

 

35

 

60

30

62

 

 

 

 

 

30

 

 

 

31

 

 

31

 

30

 

30

32

 

 

 

59

 

 

 

3

35

 

 

 

 

46

62

 

 

 

 

 

 

29

60

29

5

Image 5 Contents
Model No. PFTL58580 Serial No QUESTIONS?Customer HOT Line Mon.ÐFri., 6 a.m.Ð6 p.m. MST Important Precautions Table of ContentsPage Left Side Right Side Before YOU BeginAssembly Use these holes Tighten all parts used in this step and in stepPerformant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Step By Step Console Operation Diagram of the ConsoleCALS/FAT Cals DISTANCE/LAPSHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top Maintenance and TROUBLE-SHOOTINGProblem The power turns off during use Problem The walking belt slips when walked on Problem The walking belt slows when walked onProblem The walking belt is off-center when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Suggested Stretches Key No. Qty Description Part LISTÑModel No. PFTL58580Exploded DRAWINGÑModel No. PFTL58580 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty