HOW TO TURN ON THE POWER
IMPORTANT: If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not do this, the console displays or other electrical components may become damaged.
Plug in the power cord |
|
|
|
|
|
|
|
| |
(see page 9). Next, locate |
|
|
|
|
| Reset | |||
the reset/off circuit breaker |
| Position |
|
|
on the treadmill frame near |
|
|
|
|
|
|
|
| |
the power cord. Make sure |
|
|
|
|
|
|
|
| |
that the circuit breaker is in |
|
|
|
|
the “reset” position. |
|
|
|
|
IMPORTANT: The console features a display demo mode, designed to be used if the treadmill is dis- played in a store. If the displays light as soon as you plug in the power cord and switch the circuit breaker to the reset position, the demo mode is turned on. To turn off the demo mode, hold down the Stop button for a few seconds. If the displays remain lit, see THE INFORMATION MODE on page 16 to turn off the demo mode.
Next, stand on the foot rails of the treadmill. Locate the clip attached to the key (see the drawing on page 10), and slide the clip securely onto the waistband of your clothes. Then, insert the key into the console. After a moment, the displays will light. IMPORTANT: In an emergency situation, the key can be pulled from the console, causing the walking belt to slow to a stop. Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip.
HOW TO USE THE MANUAL MODE
1.Insert the key into the console.
See HOW TO TURN ON THE POWER above.
2.Enter your weight if desired.
If you enter your weight into the console, the con- sole will display a more accurate estimate of the number of calories that
you burn. To enter your
weight, press the Your Weight increase and de- crease buttons repeatedly. Note: Once you have entered your weight, it will be saved in memory.
3. Select the manual mode.
When you in- |
|
|
|
|
|
|
|
|
|
sert the key, |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
the manual |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
mode will be |
|
|
|
|
|
|
|
|
|
selected. If |
|
|
|
| Track |
|
|
| |
you have se- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
lected a pro- |
|
|
|
|
|
|
|
| |
gram, reselect the manual mode by pressing either of the Programs buttons repeatedly until a track appears in the upper half of the display.
4. Start the walking belt.
To start the walking belt, press the Start button, the Speed increase button, or one of the speed but- tons numbered 1 to 10.
If you press the Start button or the Speed in- crease button, the walk- ing belt will begin to move at 1 mph. As you
exercise, change the
speed of the walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press a button, the speed setting will change by 0.1 mph; if you hold down a button, the speed setting will change in increments of 0.5 mph. Note: After you press the buttons, it may take a mo- ment for the walking belt to reach the selected speed setting.
If you press one of the numbered buttons, the walking belt will gradually change speed until it reaches the selected speed setting. To select a speed setting that includes a
To stop the walking belt, press the Stop button. The time will begin to flash in the display. To restart the walking belt, press the Start button, the Speed increase button, or one of the numbered buttons.
5.Change the incline of the treadmill as desired.
To change the incline of the treadmill, press the Incline increase and decrease buttons. Each time you press a button, the incline will change by 0.5%. Note: After you press the buttons, it may take a moment for the treadmill to reach the selected in- cline setting.
11