RECORDING
Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components.
|
|
|
|
| |||||
|
|
|
|
|
|
|
| VOLUME |
|
| OPTIMIZER |
|
|
|
|
|
|
|
|
| MIC | PRESET/TUNING FM/AM | A/B/C/D/E | l PRESET/TUNING h | MEMORY TUNING MODE |
|
|
|
|
|
| PROGRAM |
|
| INPUT |
|
|
|
|
PHONES |
|
|
|
|
|
|
|
|
|
SPEAKERS | STRAIGHT | TONE CONTROL | INPUT MODE | MULTI CH | PURE DIRECT |
|
|
| |
A | B |
|
|
| INPUT |
|
|
|
|
STANDBY |
|
|
|
|
|
|
| VIDEO AUX |
|
/ON |
|
|
|
|
|
|
|
|
|
SILENT CINEMA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| S VIDEO | VIDEO | L AUDIO R | OPTICAL |
1 |
|
|
| 2 |
|
| TRANSMIT |
| LEARN |
| |
1 | SYSTEM | STANDBY |
| INPUT MODE |
|
POWER | SLEEP |
| |||
A | B | PHONO | MULTI CH IN |
| |
| TUNER | CD | 2 | ||
| DTV/CBL | VCR 1 | DVR/VCR2 | DVD |
SELECT
1Turn on the power of this unit and all connected components.
2Select the source component you want to record from.
Notes
•When this unit is set in the standby mode, you cannot record between other components connected to this unit.
•The setting of TONE CONTROL, VOLUME, “SPEAKER LEVEL” (page 59) and programs does not affect recorded material.
•A source connected to the MULTI CH INPUT jacks of this unit cannot be recorded.
•
•Digital signals input to the DIGITAL INPUT jacks are not output to the analog AUDIO OUT (L/R) jacks for recording. Likewise, analog signals input to the AUDIO IN (L/R) jacks are not output to the DIGITAL OUTPUT jack. Therefore, if your source component is connected to provide only digital (or analog) signals, you can only record digital (or analog) signals.
•A given input source is not output on the same REC OUT channel. (For example, the signal input from VCR 1 IN is not output on VCR 1 OUT.)
•Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.
If you playback a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.
OPERATION | BASIC |
|
|
INPUT | A | B | PHONO | MULTI CH IN |
| TUNER | CD | ||
| or |
|
|
|
| DTV/CBL | VCR 1 | DVR/VCR2 | DVD |
Front panel | Remote control | |||
3Start playback (or select a broadcast station) on the source component.
4Start recording on the recording component.
y
Do a test recording before you start an actual recording.
■Special considerations when recording
DTS software
The DTS signal is a digital bitstream. Attempting to digitally record the DTS bitstream will result in noise being recorded. Therefore, if you want to use this unit to record sources that have DTS signals recorded on them, the following considerations and adjustments need to be made.
For DVDs and CDs encoded with DTS, when your player is compatible with the DTS format, follow its operating instructions to make a setting so that the analog signal will be output from the player.
English
47
