ION RX-V750 Resetting parameters to the factory presets, 4Press u / d to select the parameters

EDITING SOUND FIELD PARAMETERS

4Press u / d to select the parameters.

+

TV VOL

CH	TV MUTE	CH
–		+
	SELECT

PRESETPRESET

TV VOL

–

5Press j / i to change the parameter value.

When you set a parameter to a value other than the factory-set value, an asterisk mark (*) appears by the parameter name on the front panel display.

+

TV VOL

CH	TV MUTE	CH
–		+
	SELECT

PRESET

TV VOL

–

6Repeat steps 3 through 5 as necessary to change other program parameters.

Note

You cannot change parameter values when “MEMORY GUARD” is set to ON. If you want to change the parameter values, set “MEMORY GUARD” to OFF (see page 63).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

■Resetting parameters to the factory presets

To reset a certain parameter

Select the parameter you want to reset, then press j / i repeatedly until the asterisk mark (*) next to the parameter name disappears.

To reset all parameters

Use PARAM. INI (see page 64).

74