TROUBLESHOOTING
■Remote control
Problem | Cause | Remedy | Refer to | |
page | ||||
|
|
| ||
|
|
|
| |
The remote control | Wrong distance or angle. | The remote control will function within a maximum | 8 | |
does not work nor |
| range of 6 m (20 ft) and no more than 30 degrees off- |
| |
function properly. |
| axis from the front panel. |
| |
|
|
|
| |
| Direct sunlight or lighting (from an | Reposition this unit. | — | |
| inverter type of fluorescent lamp, etc.) is |
|
| |
| striking the remote control sensor of this |
|
| |
| unit. |
|
| |
|
|
|
| |
| The batteries are weak. | Replace all batteries. | 3 | |
|
|
|
| |
| The manufacturer code was not correctly | Set the manufacturer code correctly. | 66 | |
| set. |
|
| |
| Try setting another code for the same manufacturer. | 66 | ||
|
| |||
|
|
|
| |
| Even if the manufacturer code is correctly | Program the necessary functions independently into | 69 | |
| set, there are some models that do not | the programmable buttons using the Learn feature. |
| |
| respond to the remote control. |
|
| |
|
|
|
| |
The remote control | The batteries of this remote control and/or | Replace the batteries. | 3 | |
does not “learn” new | the other remote control are too weak. |
|
| |
functions. |
|
|
| |
The distance between the two remote | Place the remote controls at the proper distance. | 69 | ||
| ||||
| controls is too much or too little. |
|
| |
|
|
|
| |
| The signal coding or modulation of the | Learning is not possible. | — | |
| other remote control is not compatible |
|
| |
| with this remote control. |
|
| |
|
|
|
| |
| Memory capacity is full. | Delete other unnecessary functions to make room for | 72 | |
|
| the new functions. |
| |
|
|
|
|
| INFORMATION | ADDITIONAL |
|
|
|
|
|
|
| English |
|
|
|
|
83
