ION DSP-AX750SE RX-V750Europe model only, 8TUNING MODE AUTO/MAN’L MONO RX-V750, 9VIDEO AUX jacks

8TUNING MODE (AUTO/MAN’L MONO) (RX-V750)

Switches the tuning mode between automatic (AUTO indicator on) and manual (AUTO indicator off).

9VIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source.

0VOLUME

Controls the output level of all audio channels. This does not affect the REC OUT level.

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers.

All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

BSPEAKERS A/B

Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed.

CPRESET/TUNING (EDIT) (RX-V750)

Switches the function of PRESET/TUNING l / h (LEVEL –/+) between selecting preset station numbers and tuning.

DSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is selected, input signals (2-channel or multi-channel) are output directly from their respective speakers without effect processing.

EFM/AM (RX-V750)

Switches the reception band between FM and AM.

FPROGRAM

Use to select sound field programs or adjust the bass/treble balance (in conjunction with TONE CONTROL).

GTONE CONTROL

Use to adjust the bass/treble balance for the front left and right, center, presence and subwoofer channels (see page 32).

CONTROLS AND FUNCTIONS

HINPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of signals received when one component is connected to two or more of this unit’s input jacks (see page 37).

IINPUT selector

Selects the input source you want to listen to or watch.

JMULTI CH INPUT

Selects the source connected to the MULTI CH INPUT jacks. When selected, the MULTI CH INPUT source takes priority over the source selected with INPUT (or the input selector buttons on the remote control).

KPURE DIRECT

Turns on or off PURE DIRECT mode (see page 36).

■RX-V750 Europe model only

LRDS MODE/FREQ

Press this button when the unit is receiving an RDS station to cycle the display between the PS mode, PTY mode, RT mode, CT mode (if the station offers those RDS data services) and/or the frequency display.

MPTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode.

NPTY SEEK START

Press this button to begin searching for a station after the desired program type has been selected in the PTY SEEK mode.

OEON

Press this button to select a radio program type (NEWS, INFO, AFFAIRS, SPORT) to tune in automatically.

INTRODUCTION

English

5