ProForm PFTL69806.0 user manual Assembly, Make sure that the power cord is unplugged

Page 6

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor- mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench

and your own phillips screwdriver

(with

a shaft at least 6” long) and wire cutters

.

 

Use the drawings below to identify the hardware used during assembly. Note: If a part is not in the parts bag, check to see if it has been preattached to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly.

Extension Leg Nut (67)–4

Star Washer (8)–8

1” Tek Screw (83)–4

Latch Screw (3)–2

Console Bolt (64)–4

Extension Leg Bolt (65)–4

1. Make sure that the power cord is unplugged.

1

 

 

 

 

 

With the help of a second person, carefully tip the

 

 

84

treadmill onto its left side as shown. Partially fold the

 

 

 

 

 

Frame (58) so the treadmill is more stable. Do not fully

 

 

 

fold the Frame until the treadmill is completely as-

65

 

 

sembled.

 

 

8

82

82

 

 

 

 

Attach four Base Pads (82) (only two are shown) to the

 

 

 

base of the Uprights (84) with four 1” Tek Screws (83).

 

 

 

Insert an Extension Leg (89) into the base of the Uprights

 

 

83

 

 

 

(84) as shown. Hold two Extension Leg Nuts (67) in the

 

 

67

bottom of the Extension Leg. Next, insert two Extension

 

89

Leg Bolts (65) with Star Washers (8) into the top of the

 

 

Extension Leg, and firmly tighten the Extension Leg Bolts

58

 

 

into the Extension Leg Nuts.

 

 

With the help of a second person, carefully tip the

 

 

 

treadmill onto its other side. Attach the other

 

 

 

Extension Leg (not shown) as described above.

 

 

 

6

Image 6
Contents QUESTIONS? Model No. PFTL69806.0 Serial NoCall TOLL-FREE Table of Contents Important Precautions Page Before YOU Begin Right SideBack Assembly Make sure that the power cord is unpluggedFold the Frame until the treadmill is completely as Sembled Screws and then tighten them Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeMeasure your heart rate if desired Turn on the fan if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select a preset programHOW to USE a Heart Rate Program Select a heart rate programFollow your progress with the display Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0706A Qty DescriptionExploded DRAWING-Model No. PFTL69806.0 Exploded DRAWING-Model No. PFTL69806.0 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT