ProForm PFTL69806.0 user manual Information MODE/DEMO Mode, Optional Chest Pulse Sensor

Page 16

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also al- lows you to select miles or kilometers as the unit of measurement and to turn on and turn off the demo mode.

To select the information mode, hold down the Stop button while inserting the key into the console. When the information mode is selected, the following informa- tion will be shown in the display:

The center of the display will

 

 

show the total number of

 

 

miles (or kilometers) that the

Miles

 

walking belt has moved and

Hours

the total number of hours

 

 

that the treadmill has been

used. An “E” for English miles or an “M” for metric kilo- meters will appear in the right side of the display. Press the Speed increase button to change the unit of mea- surement if desired.

IMPORTANT: If a “d” appears in the right side of the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is dis- played in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the indicators in the display will automatically appear in a preset sequence, although the buttons on the console will not operate. If a “d” appears when the information mode is selected, press the Speed decrease button so “d” disappears.

THE OPTIONAL CHEST PULSE SENSOR

An optional chest pulse sensor adds even more fea- tures to the console. The chest pulse sensor offers hands-free operation, and enables you to use the con- sole’s two heart rate programs. To purchase the op- tional chest pulse sensor, call the toll-free tele- phone number on the front cover of this manual.

If you purchase the optional chest pulse sensor, follow the steps below to install the receiver in- cluded with the chest pulse sensor.

1.Make sure that the key is removed from the con- sole and that the power cord is unplugged.

Remove the indicated Screw (3) and the Access Door (76) from the back of the Console Base (85).

2.Connect the wire on the receiver (A) to the indicated wire extending from the Console Base (85). Hold the receiver so the small cylinder is oriented as shown and is facing the Console Back. Attach the receiver to the plastic posts on the Access Door (76) with the two included small screws.

To exit the information mode, remove the key from the console.

3.Make sure that no wires are pinched. Reattach the Access Door (76) with the Screw (3). Discard the other wires included with the receiver.

85

Wire

 

Small

 

 

 

Screws

76

 

 

3

A

Small

 

Cylinder

 

 

16

Image 16
Contents Model No. PFTL69806.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page Right Side Before YOU BeginBack Make sure that the power cord is unplugged AssemblyFold the Frame until the treadmill is completely as Sembled Screws and then tighten them Page HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTurn on the fan if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove HOW to USE a Preset Program Select a preset programHOW to USE a Heart Rate Program Select a heart rate programFollow your progress with the display Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches R0706A Qty DescriptionExploded DRAWING-Model No. PFTL69806.0 Exploded DRAWING-Model No. PFTL69806.0 Limited Warranty Ordering Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT