HOW TO CONNECT YOUR VCR
Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a
A.Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the AUDIO OUT jack on your VCR.
A | ANT. IN |
VIDEO AUDIO |
|
IN |
|
| RF OUT |
| CH |
3 | 4 |
OUT |
|
AUDIO OUT | |
RIGHT |
|
LEFT |
|
Adapter |
|
Audio |
|
Cable |
|
B. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter.
Plug the adapter into an RCA
B |
|
|
|
| ANT. IN |
| VIDEO AUDIO |
|
| IN |
|
|
| RF OUT |
|
| CH |
| 3 | 4 |
| OUT |
|
RCA | ||
Audio | Adapter |
|
Cable |
| |
Wire removed from |
| |
AUDIO OUT jack |
|
HOW TO USE IFIT.COM CD AND VIDEO PROGRAMS
To use iFIT.com CDs or videocassettes, the treadmill must be connected to your portable CD player, portable stereo, home stereo, computer with CD player, or VCR. See HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER on page 16 - 18. To purchase iFIT.com CDs or videocas- settes, call the
Follow the steps below to use an iFIT.com CD or video program.
1 Insert the key into the console.
See HOW TO TURN ON THE POWER on page 10.
2 Select the iFIT.com mode.
To select the iFIT.com mode, press the iFIT but-
ton. The let- ters “iFIT”
will appear in the display.
3 PressVCR. the Play button on your CD player or
Note: If you are using an iFIT.com CD, insert the CD into your CD player; if you are using an iFIT.com videocassette, insert the videocassette into your VCR.
A moment after the Play button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainer’s instructions. Note: If the time is flashing in the dis- play, press the Start button or the Speed + button on the console. The treadmill will not respond to a CD or video program while the time is flashing in the display.
During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before your personal trainer describes the change.
18