JVC SP-DSC99TN manual Changing the Display Settings, Monitor Type, Screen Saver, On Screen Guide

Page 44

7Adjusting the center and rear speaker output levels

You can adjust the speaker output level for the center speaker and rear speakers.

You can adjust the output level while listening to the test tone.

•Make adjustments so that the sound level of the selected speaker is set at the same level as that of the front speakers.

•To output test tone properly, turn off the sound mode and the DSP Surround mode before entering on-screen menu.

1Display EXPERT SPEAKER SETTING menu.

• See page 38.

2 Press Cursor (5 / °/ 3/ 2) to move

 

to “TEST

 

 

TONE,” then press ENTER.

 

 

“TEST TONE” changes its color to green and test tone comes out of in the following sequence—left front speaker, center speaker, right front speaker, right rear speaker, and left rear speaker.

•Test tone is output only when the tray loaded with a DVD is selected.

3 Press Cursor (5 / °/ 3/ 2) to move to “C.SPK–

LEVEL” or “R.SPK–LEVEL,” then press ENTER.

4Press Cursor 3or 2to adjust the output level, then press ENTER.

•You can adjust the output level from “–6 dB” to “+6 dB.”

5Repeat steps 3 and 4 to adjust the other speaker output level.

6Press Cursor (5 / °/ 3/ 2) to select “TEST TONE,” then press ENTER.

Test tone stops.

7When finished, press Cursor (5/ ° / 3/ 2) to move to “EXIT,” then press ENTER.

EXPERT SPEAKER SETTING menu disappears.

7Selecting the speaker for bass output

You can select the speaker for bass output according to your preference.

1Display EXPERT SPEAKER SETTING menu.

• See page 38.

2 Press Cursor (5 / °/ 3/ 2) to move

 

to “BASS,”

 

 

then press ENTER.

 

 

3Press Cursor 3or 2 to select your desired setting.

•L/R : to output the bass signals through the subwoofers built-in the supplied front speakers.

•S.woofer : to output the bass signals through the subwoofer connected to the SUB-WOOFER 5.1ch OUT jack.

4When finished, press Cursor (5/ ° / 3/ 2) to move to “EXIT,” then press ENTER.

EXPERT SPEAKER SETTING menu disappears.

7Adjusting the subwoofer output levels

You can adjust the output level according to your preference.

1Display EXPERT SPEAKER SETTING menu.

• See page 38.

2 Press Cursor (5/ ° / 3/ 2) to move

 

to “SUB

 

 

WOOFER,” then press ENTER.

 

 

• You can adjust the output level from “–6 dB” to “+6 dB.”

3Press Cursor 3or 2 to adjust the output level, then

ENTER.

4When finished, press Cursor (5 / °/ 3/ 2) to move to “EXIT,” then press ENTER.

EXPERT SPEAKER SETTING menu disappears.

Changing the Display Settings

On DISPLAY menu, you can change the following display settings.

MONITOR TYPE

4:3 LB

SCREEN SAVER

MODE 2

ON SCREEN GUIDE

ON

 

 

EXIT

PRESS

KEY

 

•MONITOR TYPE :

Set the monitor type to use while playing back a DVD recorded with 16:9 wide screen video signal.

Selectable types—4:3 LB

, 16:9 WIDE, 4:3 PS

(See page 42.)

 

•SCREEN SAVER :

Select the screen saver to prevent a TV monitor from burning out.

–Select MODE“ 1” to activate the screen saver by making the TV screen dark.

–Select MODE“ 2” to activate the screen saver by showing the original screen-saver.

–Select OFF“ ” to deactivate this function.

When “MODE 1” or “MODE 2” is selected, screen saver functions if still (static) picture is shown for more than 5 minutes.

•ON SCREEN GUIDE :

By watching the on-screen indications shown on the TV screen, you can confirm what you are doing while operating the DVD player.

–Select ON“ ” to show the on-screen indications.

–Select OFF“ ” to deactivate this function.

– 41 –

Page 43 Page 45
Image 44
Page 43 Page 45
Contents CA-MXDVA9 Page Class Laser Product Important for Laser ProductsAbout This Manual PrecautionsIntroduction Contents Location of the Buttons and Controls Front PanelFront Panel Become familiar with the buttons and controls on your unitDisplay Window See pages in the parentheses for detailsRemote Control Remote ControlFM/AM button 12 AUX buttonGetting Started Supplied AccessoriesConnecting Antennas Close the speaker terminal Connecting SpeakersTurn the AM loop antenna until you have the best reception Connecting Other Equipment To connect a center speaker and rear speakersTo connect a subwoofer Ideal speaker layoutAbout sounds output through the rear terminals Through the Optical Digital Output terminalCanceling the Display Demonstration Adjusting the Voltage SelectorOn the unit only To connect a TVTurning On or Off the Power Setting the ClockSetting the AM Tuner Interval Spacing Common OperationsAdjusting the Volume Press Level + or to adjust the front speaker output balanceAdjusting the Front Speaker Output Balance To turn down the volume level temporarilyReinforcing the Bass Sound Selecting the Sound ModesSEA Sound Effect Amplifier modes Manual modes Manual 1/2/3Creating Your Own Sound Modes -Manual Mode On the unit only Select one of the preset sound modesTo use your own sound mode Press and hold SET until SEA Cont appears on the displayTuning into a Station Tuning into a Preset StationPresetting Stations Listening to FM and AM BroadcastsDisc cannot accept an operation you have tried to do If appears on the screen when pressing a buttonPlaying Back Discs-Introduction Disc Structure DVD Features Selecting the Multi-Angle ViewSVCD, VCD and CD For DVD onlySelecting the Audio Language or Sound Selecting the SubtitleBasic Disc Playback Loading DiscsCommon Basic Disc Operations DVD PlaybackTo use Time Search and Chapter Search on the TV screen To show the on-screen indicationSVCD/VCD/CD Playback To go to another trackTo use Time Search on the TV screen Press Control + or − to move to Time SEARCH, then pressSearching for a Particular Point Prohibiting Disc Ejection-Tray LockForward Search Reverse SearchOn the remote control only Press Menu or Title Menu OperationsTo check the programed contents Selecting Playback ModesLoad discs To modify the programOn the remote control Load discs Press Play ModePress Control + or − to Move to ProgramPlaying at Random-Random Play Repeating Playback Repeat PlayRepeat DVD/SVCD/VCD Special Effect Playback Still Picture/Frame-by-Frame PlaybackSlow Motion Playback-Slow Viewing Continuous Still Pictures-StrobeTo cancel the function, select Theater OFF Press Select or EnterTheater position indication Appears on the TV screen Playback starts from the selected sceneLocating the Beginning of a Song -Music Scan Playing Back TapesPlaying Back a Tape Activating and Adjusting the DSP Surround Mode Press DSP Surround or to select a desired DSP Surround modeYou can use the DSP Surround mode for any source you like To cancel the DSP Surround mode, select OFF so thatRecording Recording a Tape on Deck BOn the unit only Press Eject 0 for the deck B Check the tape direction of deck BDubbing Tapes SVCD/VCD/CD Direct RecordingPress Dubbing You can record from one tape to anotherTo change the tape length manually To cancel Auto Edit RecordingAuto Edit Recording Using the Microphones Turn MIC Level and Volume as you sing into the microphonesOn the remote control only Singing along KaraokeConnect the microphones Microphone mixingTo use microphone only No background sound will be heardReserving Karaoke Songs Karaoke Program Play Press V. Mask while Holding down ShiftBasic Procedure On the remote control only Press ChoicePress Cursor 3 or 2to select a proper setting you want Operating the On-Screen MenuChanging the Initial Language Settings Changing the Various Audio SettingsMore about Speaker Setting Expert adjustment procedureDisplay Expert Speaker Setting menu SUB WOOFER-LEVELChanging the Display Settings Monitor TypeScreen Saver On Screen GuideChanging the System Settings AV Compulink ModeEven if 43 PS is selected, the screen size may Auto StandbyUsing the Parental Lock Setting the Parental Lock LevelUnlocking the Parental Lock Temporarily Press EnterUsing the Timers Using Daily TimerPress CLOCK/TIMER again How Daily Timer actually worksIf you have set the Daily Timer With the unit turned on When selecting Tuner FM or Tuner AMWhen selecting Disc Turn 4/ ¢to set the volume levelUsing Recording Timer Select the preset stationHow Recording Timer actually works If necessaryUsing Sleep Timer Timer PriorityOn the remote control only Press Sleep Wait for about 5 seconds after specifying the time lengthUsing AV Compu Link Control System Automatic power on/offAV Compu Link Connection Available operationsCleaning the unit To clean the discHandling discs Handling cassette tapesAppendix B-Troubleshooting Output Signals Playback disc Video CD, Audio CD44.1 kHz, 16 bit Linear PCM Audio CD with DTSAppendix E-Language Code for On-Screen Menu Appendix F-Country Code for Parental Lock Page Appendix G-Glossary Specifications 230V 240V SP-MXDVA9 Æjvc wÝ w Altifalantes Para Combinação A/V Speaker for A/V CombinationAltavoz Para Combinación A/V Specifications ConnectionConexión LigaçãoEspecificaciones Especificações∞ jÝu²d² ‚dŠË Ϋbz« ÎöLŠ V³ Uýô« X½U«- …dL² ÆÊu ËdJO HOW to Install Surround Speakers Altavoz Para Combinacion A/VComo Instalar LOS Altavoces DE Entorno Maneira DE Instalar OS Altifalantes DE SOM Envolvente放大器連接 VDÝuEspecificaçães EspecificaçãesSP-DSC99TN SP-DSS99TNEN. SP. PR. CH. AR 0501JYMPRIJEM Display Demonstration

GVT0057-016A, SP-DSC99TN specifications

The JVC SP-DSC99TN, GVT0057-016A is a speaker system that merges innovative audio technologies with user-friendly features, making it an excellent addition for both casual listeners and audiophiles alike. Designed to deliver superior sound quality, the SP-DSC99TN stands out in various sound environments, from home theaters to high-end music setups.

One of the most notable features of the JVC SP-DSC99TN is its advanced speaker configuration. With multiple drivers, including a powerful subwoofer, this model provides a rich sound spectrum that covers deep bass, articulate mids, and crisp highs. This three-way design enables the speaker to produce clear and balanced audio, enhancing overall listening experiences.

The GVT0057-016A model also incorporates JVC's proprietary sound optimization technology, which automatically adjusts the audio output based on the room's acoustics. This feature ensures that regardless of placement, the sound remains consistently high quality, offering users an immersive experience whether they are watching movies or listening to music.

In terms of connectivity, the SP-DSC99TN supports a range of options for modern devices. It includes Bluetooth technology for seamless streaming from smartphones and tablets, alongside traditional wired connections such as RCA and optical inputs for a stable, high-quality signal. This versatility makes it easy to integrate the speaker system into existing setups.

Durability is another key characteristic of the JVC SP-DSC99TN. Constructed with robust materials, it is designed to withstand everyday use without compromising on performance or aesthetic appeal. The sleek design and modern finish make it a stylish addition to any room, ensuring that it not only sounds great but also looks sophisticated.

Furthermore, the JVC SP-DSC99TN is energy efficient, utilizing low power consumption technologies that reduce electricity use without sacrificing sound quality. This makes it a responsible choice for eco-conscious consumers.

Overall, the JVC SP-DSC99TN, GVT0057-016A speaker system combines top-notch audio performance with modern features, making it a fantastic choice for anyone looking to elevate their sound experience. Whether for music, movies, or games, this model meets diverse auditory needs while ensuring satisfaction and reliability.
Top Page Image Contents