ProForm 831.24723.2 user manual Information Mode, HOW to USE the Crosswalk Arms

Page 16

THE INFORMATION MODE

The console features an information mode that keeps track of the total distance that the walking belt has moved and the total number of hours that the treadmill has been used. The information mode also allows you to select a measurement system of miles or kilome- ters, and turn on and off the display demo mode.

To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:

As you walk on the treadmill, you can hold the handrails or use the crosswalk arms. To exercise your arms, shoulders, and back for a total body workout, move the crosswalk arms forward and back as you walk on the treadmill.

To vary the intensity of your upper body exercise, the resistance of the crosswalk arms can be adjusted. To increase the resistance, turn the resistance knobs clockwise; to decrease the resistance, turn the knobs counterclockwise.

An “E” for English miles or an “M” for metric kilometers will appear in the lower right display. Press the Speed in- crease button to change the unit of measurement if de- sired.

The lower left display will show the total number of miles (or kilometers) that the walking belt has moved.

The upper display will show the total number of hours the treadmill has been used.

Note: The console features a display demo mode, de- signed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function normally when you plug in the power cord, switch the circuit breaker to the reset position, and in- sert the key into the console. However, when you re- move the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a “d” will appear in the lower right display while the in- formation mode is selected. To turn on or off the demo mode, press the Speed decrease button.

To exit the information mode, remove the key from the console.

HOW TO USE THE CROSSWALK ARMS

Upper Body

Arms

Resistance

Knobs

16

Image 16
Contents Model No Serial No Sears, Roebuck and Co., Hoffman Estates, ILTable of Contents Important Precautions Page Before YOU Begin Make sure that the power cord is unplugged AssemblyDo not fully fold the Frame yet Step with a second Bolt Spacer 79, Bolt Star Washer Careful not to pinch the Upright WireFully tighten the Bolts yet Page Page Knob HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeUpper dis- play-The upper display can show Lower right dis- play-The lower rightMeasure your heart rate if desired Select a preset workout. To select a preset work HOW to USE a Preset WorkoutSelect length of workout if desired Information Mode HOW to USE the Crosswalk ArmsHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Page Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0607A Key No. Qty DescriptionIf a part is missing, call Exploded Drawing A-Model No Exploded Drawing B-Model No Exploded Drawing C-Model No Exploded Drawing D-Model No DAY Full Warranty Get it fixed, at your home or ours