Assembly

Make sure that the power cord is unplugged. Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal con- dition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver	,
wire cutters	, and adjustable wrench	.

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 26 and 27. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preattached to one of the parts to be assembled. If a part is missing, call toll-free1-888-533-1333. To avoid damaging plastic parts, do not use power tools for assembly.

Screw (95)–2

3/4” Tek Screw (52)–2

Cover Screw (34)–4

Base Pad Screw (40)–4

Washer (71)–4	Handrail Bolt (80)–4		1 3/4” Bolt (76)–2
Washer (71)–4	Nut (20)–4
Wheel Bolt (90)–2			3” Bolt (86)–2
1. With the help of a second person, raise the Uprights (97)		1
to a vertical position.		1
to a vertical position.
Insert the tab on one of the Handrail Brackets (81) into			27
the indicated slot in the left Upright (97). Attach the			27
the indicated slot in the left Upright (97). Attach the
Handrail Bracket with a 3/4” Tek Screw (52).
Identify the Left Handrail Cover (27), which has holes in		43
Identify the Left Handrail Cover (27), which has holes in
the sides. Slide the Left Handrail Cover onto the upper				97
end of one of the Handrails (43). Slide one of the				Slot
Handrail Caps (105) onto the lower end of the Handrail.			Hole	Slot
Make sure that the small hole in the Handrail Cap is to-			Hole
Make sure that the small hole in the Handrail Cap is to-				52
ward the bend in the Handrail.			105	52
		Bend		81
		Bend
			Small Hole
	5