ProForm 831.24655.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 17

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be perma- nently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back. Raise the frame about halfway to the vertical position.

2.Move your right hand to the position shown, and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the catch is past the latch pin. Then, slowly release the latch knob. Make sure that the frame is securely held by the latch pin.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert it to the storage position as described above. Make sure that the frame is held securely by the latch pin.

1.Hold the handrails and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of in- jury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against a wheel, and carefully lower the tread- mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1

2

Engaged

Catch

Latch Knob

Latch Pin

Handrails

Wheels Base

1.See drawing 2 above. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin.

2.See drawing 1 above. Hold the frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight.

17

Image 17
Contents Model No Serial No Assembly Operation Maintenance Part List and DrawingTable of Contents Important Precautions Page Back Before YOU BeginRight Side Firmly tighten the Extension Leg Bolts AssemblyMake sure that the power cord is unplugged Extension leg. Firmly tighten the Extension Leg Bolts Treadmill until it is completely assembledWire PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerWhenkey. you are finished exercising, remove Measure your heart rate if desiredTurn on the fan if desired Press the Start button to start the program HOW to USE a Calorie Program Select a cross training program HOW to USE a Cross Training ProgramContinue the cross training program Perform the first strength exercise when PromptedOptional Chest Pulse Sensor Information ModeHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingTop View Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description R0606AIf a part is missing, call toll-free 831.24655.0 Part 2 Part 3 Part 4 Sears, Roebuck and Co., Hoffman Estates, IL DAY Full Warranty