ProForm 831.294062 user manual

Page 6

3.Attach the Latch Assembly (82) to the Left Upright (84) with the two Latch Screws (46). Start both Latch Screws before tightening either of them. Note: The Latch Screws may be preattached to the Left Upright.

4.Refer to step 6 and locate the four Upright Bolts (86). Loosen the Upright Bolts two to three turns.

Refer to drawing 4c. With the help of a second person, hold the Console Base (101) near the Uprights (80, 84). Look under the Console Base and locate the wires on the sides of the Console Base. Make sure that the wires are not routed through the openings for the Trays (109, 111). Drawing 4a shows the correct route for the wires. Drawing 4b shows an incorrect route.

Refer to drawing 4c. Cut the plastic ties holding the Wire Harness (74) and the Pulse Wire in the Uprights (80, 84). Connect the Wire Harness and the Pulse Wire to the wires on the sides of the Console Base (101). Make sure to connect the connectors properly (see the inset drawings). IF THE CONNECTORS ARE NOT CON-

NECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON. The con- nectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try again. Insert the excess Wire Harness and Pulse Wire up into the Console Base.

5.Set the Console Base (101) on the Uprights (80, 84). Be careful not to pinch the Wires (not shown) in the Uprights. Attach the Console Base to each Upright with two Console Bolts (76) and two Internal Star Washers (77); start all four Console Bolts before tightening any of them.

Make sure that the Left and Right Trays (109, 111) are pressed into the Console Base (101).

3

 

 

 

46

82

 

 

 

84

 

4a

 

4b

 

Correct

Incorrect

4c

 

 

 

111

109

 

 

 

101

 

 

80

84

 

74

Pulse

 

Wire

5

 

101

 

 

84

 

111

109

 

77

77

 

 

 

 

77

76

80

76

6

Image 6
Contents Assembly Operation Maintenance Part List and Drawing Model No Serial NoTable of Contents Important PrecautionsPage Before YOU Begin Right SideBack Assembly Legs remain in the UprightsPage 107 Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeDistance/Incline dis Time/Pace display- When the manual modeCalories/Pulse Measure your heart rate if desiredHOW to USE Preset Programs Select one of the preset programsPut on the chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programEnter your age and a maximum speed setting Turn on the fans if desiredHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Whenkey. the program is completed remove Follow the on-line instructions to start Program HOW to USE Programs Directly from OUR WEB SiteWhen the program has ended, remove the key Return to the treadmill and stand on the footInformation MODE/DEMO Mode HOW to Level the TreadmillOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEProblem The console is too high or too low TroubleshootingProblem The power turns off during use Problem The treadmill rocks during useProblem The walking belt slows when walked on TopWorkout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencySuggested Stretches R0404A Qty DescriptionPart Identification Chart If a part is missing, call toll-free294062 Exploded Full ONE Year Warranty Sears, Roebuck and Co., Dept WA, Hoffman Estates, IL

831.294062 specifications

The ProForm 831.294062 is a versatile and innovative piece of fitness equipment designed to cater to a wide range of users, from beginners to advanced athletes. One of its standout features is the SpaceSaver design, which allows the treadmill to be folded up for easy storage, making it ideal for home use, especially in compact living spaces.

Equipped with a powerful motor, the ProForm 831.294062 offers a top speed of 10 miles per hour, allowing users to engage in a variety of workout intensities. The 10-inch display provides an easy-to-read interface where users can track their pace, distance, calories burned, and other essential workout metrics. This helps in setting and achieving fitness goals effectively.

A key feature of the ProForm 831.294062 is its adjustable incline capability. Users can simulate hill training, enhancing their workout experience by adding intensity and variety. The treadmill offers multiple incline settings, making it suitable for users at different fitness levels and adding versatility to every workout session.

Incorporating ProForm's iFit technology, the treadmill provides access to a wide array of on-demand workouts and training programs led by certified personal trainers. Users can virtually run through scenic landscapes from around the world, which boosts motivation and engagement. The iFit feature also allows for the automatic adjusting of incline and speed during workouts, providing a personalized experience.

The ProForm 831.294062 is also equipped with a cushioned running surface, which enhances comfort during workouts and reduces the impact on joints. This is particularly important for users who may be prone to injuries or prefer low-impact exercises.

For music enthusiasts, the treadmill includes built-in speakers that allow users to connect their devices and listen to their favorite tunes while working out. This can make sessions more enjoyable and help maintain motivation.

Overall, the ProForm 831.294062 stands out for its blend of functionality, compact design, and cutting-edge technology, making it an excellent option for anyone looking to enhance their fitness journey from the comfort of their home. With its robust features, this treadmill is dedicated to helping users achieve their fitness goals effectively and efficiently.