ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires your own phillips screw-
driver 
and rubber mallet 
.
Note: The underside of the treadmill walking belt is coated with
1. With the help of a second person, carefully raise the | 1 |
|
|
|
treadmill to the upright position as shown. |
|
|
| |
|
|
|
| |
Insert one of the Extension Legs (102) into the treadmill |
|
|
|
|
as shown. Make sure that the Extension Leg is turned |
|
|
|
|
so the Base Pad (99) is on the bottom. If necessary, tip |
|
|
|
|
the Uprights (69) forward as you insert the Extension |
|
| 69 |
|
Leg. |
|
|
| |
|
|
|
| |
Insert the other Extension Leg (not shown) in the same |
|
|
|
|
way. |
|
|
|
|
|
|
|
| 102 |
|
|
|
| 99 |
2. With the help of a second person, carefully lower the | 2 |
|
|
|
treadmill frame and then tip the Uprights (69) down as |
|
|
| |
|
|
|
| |
shown. Make sure that the Extension Legs (102) remain |
|
|
|
|
in the Uprights. |
|
|
|
|
Attach each Extension Leg (102) with two of the six 3/4” |
| 99 |
|
|
|
|
|
| |
Screws (100) as shown. |
| Frame |
|
|
With the help of a second person, carefully tip the |
|
|
| 69 |
Uprights (69) back to the vertical position. |
|
|
| |
| 69 |
|
| 100 |
Note: One replacement Base Pad (99) may be included. |
|
| 102 | |
|
|
| ||
Use the extra Base Pad if one becomes worn or needs to | 99 | 100 |
|
|
be replaced. |
|
| ||
| 102 |
|
| |
|
|
|
| |
3. Insert a Handrail Extension (66) into the post on the right | 3 |
|
|
|
Upright (69) as shown; make sure that the indicated |
|
|
| |
|
|
|
| |
holes are on top. Tap the Handrail Extension with a rub- |
| 76 |
| 81 |
ber mallet to fully insert it. Attach the Handrail Extension |
|
| ||
|
| 67 | ||
| Tab |
| ||
with two 1/2” Screws (67) as shown. |
|
| ||
|
|
| ||
|
| Holes |
| |
|
| Cutout |
| |
Identify the Right Foam Grip (75), which has a large cutout |
|
|
| |
|
|
|
| |
in the left side for the Pulse Bar (76). Slide the Right Foam |
| 75 |
| 69 |
Grip as far as possible onto the post on the right Upright |
|
|
| |
|
|
| Post | |
(69). (Note: It may be helpful to apply soapy water to the |
|
| 66 | |
Handrail Extension [66].) Make sure that the tab on the |
|
|
|
|
Foam Grip is inserted into the Console Base (81). |
|
|
|
|
6