Assembly, Your own phillips screwdriver

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Extension Leg Screw (53)Ð2

Screw (3)Ð2

Handrail Washer (75)Ð2

Handrail Bolt (74)Ð2

1.With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.

	2. Insert one of the Extension Legs (34) into the treadmill	2
	as shown. (Note: It may be helpful to tip the Uprights	2
	as shown. (Note: It may be helpful to tip the Uprights	11
	[11] in the direction shown by the arrow as you insert	11
	[11] in the direction shown by the arrow as you insert
	the Extension Leg.) Make sure that the Base Pad (40) is
	on the indicated side of the Extension Leg. Attach the
	Extension Leg with an Extension Leg Screw (53). Be
	sure to push on the head of the Extension Leg	53
	Screw while tightening it.	53
	Attach the other Extension Leg (34) in the same way.
	Note: One replacement Base Pad (40) may be	34
	included. Use the extra Pad if one becomes worn or	34
	included. Use the extra Pad if one becomes worn or	40
	needs to be replaced.	40