ProForm 831.29924 LaPress the Program button, Press the Play button on your CD player or, Vcr

laPress the PROGRAM button.

When the key is in- serted, the manual mode will automatically be selected. To use an i-Fit.corn CD or video, press the PROGRAM button. The i-Fit.com indicator will light.

1_1 Insert the i-Fit.com CD or video.

If you are using an i-Fit.corn CD, insert the CD into your CD player. If you are using an i-Fit.corn video, insert the video into your VCR.

BPress the PLAY button on your CD player or

VCR.

A moment after the button is pressed, your per- sonal trainer will begin guiding you through your workout. Simply follow your personar trainer's instructions.

During the CD or video program, an electronic "chirping"sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the "chirp" and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons on the console. However, when the next "chirp" is heard, the speed and/or incline will change

to the next settings of the CD or video program.

To stop the program at any time, press the START/STOP button on the console. The

TIME/MIN-MILE display will begin to flash. To restart the program, press the START/STOP but- ton again. After a moment, the walking belt will begin to move at 1 mph. When the next "chirp" is heard, the speed and incline will change to the next settings of the CD or video program. The program can also be stopped by pressing the STOP button on your CD player or VCR.

When the CD or video program is completed, the walking belt will stop and the TIME/MIN-MILE dis- play will begin to flash. Note: To use another CD or video program, press the START/STOP button or remove the key and go to step 1 on page 12.

Note: If the speed or incline of your treadmill does not change when a "chirp" is heard, make sure that the i-Fit.corn indicator is lit and the TIME/MIN-MiLE display is not flashing. Next, adjust the volume of your CD player or VCR. if the volume is too high or too low, the console may not detect the signals from your CD player or VCR. in addition, make sure that the audio cable is propedy connected.

[]Follow your progress with the LED track and the four displays.

See step 5 on page 10.

r_ Measure your pulse, if desired.

See step 6 on page 11.

BWhen the i-Fit.com CD or video is finished, remove the key.

Step onto the foot rails and remove the key from the console. Keep the key in a secure place. Note: If the displays and various indicators

on the console remain lit after the key is re- moved, the console is in the "demo" mode.

Refer to page 14 and turn off the demo mode.

CAUTION: Always remove i-Fit.com CD's and videos from your CD player or VCR when you are finished using them.

When you are finished using the treadmill, move the on/off switch near the power cord to the off position.

By adding the optional upgrade module to the console, you can add virtually endless options to your treadmill To purchase the upgrade module, visit your local department store or sporting goods store or go to www.i-fit.com.

Instructions for using other i-Fit.cornoptions will be included with the upgrade module. In addition, make sure to explore www.i-fit.comto learn more about how you can get the most from i-Fit.corn technol-

ogy!

13