ProForm 831.299402 user manual Trouble-Shooting, Symptom the Power does not Turn on, Top

Page 12

TROUBLE-SHOOTING

Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our toll-free HELPLINE at 1-800-736-6879, Monday through Saturday, 7 a.m. until 7 p.m. Central Time (excluding holidays).

1.SYMPTOM: THE POWER DOES NOT TURN ON

a.Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 7). Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. Important: The treadmill is not compatible with GFCI-equipped outlets.

b.After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

2. SYMPTOM: THE POWER TURNS OFF DURING USE

c

Tripped

Reset

a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. If the treadmill still will not run, please call our toll-free HELPLINE.

3.SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY

a.Check the batteries in the console. See BATTERY INSTALLATION on page 8. Most problems are the result of drained batteries.

b. Remove the key from the console and UNPLUG THE POWER CORD. Remove the screws from the hood. Carefully remove the hood. Locate the Reed Switch (44) and the Magnet (45) on the left side of the Pulley (50). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw (33) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

44

1/8”

50

 

 

 

 

 

45

33

 

 

Top

 

 

View

 

 

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important PrecautionsPage Before YOU Begin Right SideBack Assembly Your own phillips screwdriver and wire cuttersBottom View Operation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Console Diagram Battery InstallationSTEP-BY-STEP Console Operation CALS/FAT Cals HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE TROUBLE-SHOOTING Symptom the Power does not Turn onSymptom the Power Turns OFF During USE TopSymptom the Walking Belt Slows When Walked on Symptom the Walking Belt is OFF-CENTERHOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout GuidelinesSuggested Stretches R1000A Qty DescriptionExploded DRAWING-Model No Full 90 DAY Warranty Model NoSEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL

831.299402 specifications

The ProForm 831.299402 is a versatile and innovative piece of fitness equipment designed to enhance home workouts and cater to a broad range of fitness enthusiasts. Known for its durable construction and user-friendly features, this model is perfect for anyone looking to elevate their fitness routine without compromising on quality.

One of the standout features of the ProForm 831.299402 is its impressive range of adjustable resistance levels. This allows users to tailor their workout intensity, making it suitable for both beginners and experienced athletes alike. Whether you're looking for a light warm-up or an intensive training session, this machine can accommodate your needs, promoting improved cardiovascular fitness and muscle toning.

The ProForm 831.299402 is equipped with an ergonomic design that prioritizes user comfort. The oversized seat and handlebars ensure a secure and comfortable grip, reducing the risk of injury during prolonged sessions. Its smooth, quiet operation is another noteworthy characteristic, allowing users to enjoy their workouts without any disruptive noise, making it ideal for home settings.

Additionally, the ProForm 831.299402 comes with a built-in display that tracks essential workout metrics such as time, distance, speed, and calories burned. This real-time feedback motivates users by helping them monitor their progress and set achievable fitness goals. The display is easy to read and navigate, further enriching the workout experience.

Another impressive aspect of the ProForm 831.299402 is its sleek, compact design. This machine is designed to fit seamlessly into various home environments, making it a perfect fit for those with limited space. With its lightweight structure, it is easy to transport and store when not in use.

Moreover, this model may include compatibility with various fitness apps, allowing users to enhance their workout routines with interactive training programs and challenges. Such technology integration provides an engaging approach to fitness, inspiring users to stay consistent.

In summary, the ProForm 831.299402 is a well-rounded piece of fitness equipment with adjustable resistance levels, ergonomic design, user-friendly features, and high-tech integration. Ideal for home workouts, it meets the diverse needs of fitness enthusiasts, making it a worthy addition to any home gym.
Top Page Image Contents