4.Align the hole in the lower end of the right Handrail Arm
(10)with the hole in the frame tab as shown. Attach the Handrail Arm with a Handrail Bolt (7) and a Handrail Nut
Repeat this step on the left side.
5.Remove the backing from the Adhesive Clip (91). Press the Adhesive Clip onto the Base (70) in the indicated location. Press the Allen Wrench (92) into the Adhesive Clip.
4 |
10 |
8 |
7 |
Frame Tab |
5 |
|
|
70 | 91 | 92 |
|
6.Make sure that all parts are tightened before you use the treadmill. To protect the floor or carpet, place a mat under the treadmill. To order a mat, see the back cover of this manual.
6