ProForm 831.299461 user manual Measure your heart rate, if desired, Finished, remove the key

Page 16

During the CD or video program, an electronic ÒchirpingÓ sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION: Always listen for the ÒchirpÓ and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons on the console. However, when the next ÒchirpÓ is heard, the speed and/or incline will change to the next settings of the CD or video program.

To stop the program at any time, press the STOP button on the console. The TIME display will begin to flash. To restart the program, press the START button or the SPEED ▲ button. After a moment, the walking belt will begin to move at 1 mph.

When the next ÒchirpÓ is heard, the speed and incline will change to the next settings of the CD or video program. The program can also be stopped by pressing the STOP button on your CD player or VCR.

When the CD or video program is completed, the walking belt will stop and the TIME display will begin to flash. Note: To use another CD or video program, press the STOP button or remove the key and go to step 1 on page 15.

Note: If the speed or incline of the treadmill does not change when a ÒchirpÓ is heard:

¥make sure that the iFIT.com indicator is lit and that the TIME display is not flashing. If the

TIME display is flashing, press the START button or the SPEED button on the console

¥adjust the volume of your CD player or VCR. If the volume is too high or too low, the console may not detect the program signals

¥make sure that the audio cable is properly connected, that it is fully plugged in, and that it is not wrapped around a power cord

¥if you are using your portable CD player and the CD skips, set the CD player on the floor or another flat surface instead of on the console.

5 Follow your progress with the LED track and the four displays.

See step 5 on page 10.

6Measure your heart rate, if desired.

See step 6 on page 11.

7finished, remove the key.

See step 6 on page 12.

CAUTION: Always remove iFIT.com CDÕs and

videocassettes from your CD player or VCR when you are finished using them.When the iFIT.com CD or video program is

16

Image 16
Contents Model No Serial No SEARS, Roebuck and CO. Hoffman ESTATES, ILTable of Contents Important Precautions Page Left Side Before YOU BeginRight Side Assembly Driver , wire cutters , and rubber malletThere may be extra screws after assembly is completed HOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeCALS/FAT Cals SPEED/MIN-MILEHOW to USE Personal Trainer Programs Insert the key into the consoleSelect one of the personal trainer programs Measure your heart rate, if desired HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Audio Adapter CableFinished, remove the key Program HOW to USE Programs Directly from OUR Internet SiteWhenkey. the program is finished, remove Optional Hand Weights Information MODE/DEMO ModeOptional Chest Pulse Sensor HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TROUBLE-SHOOTINGTop Problem The walking belt slows when walked on 3ÓÐ4ÓConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LISTÑModel No Key Qty DescriptionExploded DRAWINGÑModel No 117 116 107 108 118 109 110 119 113 104 102 Model No Full 90 DAY WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL