Assembly

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Refer to the drawings below to identify the parts used in assembly. Assembly requires the following tools: The included allen wrench and your own

phillips screwdriver and two adjustable wrenches .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Extension Leg Screw (34)Ð2		Handrail Bolt (15)Ð2
		Handrail Bolt (15)Ð2
		Handrail Washer (16)Ð2
Latch Screw/		Wheel Bolt (37)Ð2
Handrail Screw (13)Ð4	Wheel Nut (39)Ð2	Wheel Bolt (37)Ð2
	Wheel Nut (39)Ð2

1.With the help of a second person, carefully raise the Uprights (14) until the treadmill is in the position shown.

2.Attach a Wheel (38) to each Extension Leg (62) with a Wheel Bolt (37) and a Wheel Nut (39) as shown. Tighten the Wheel Bolts only until they are snug; do not overtighten the Wheel Bolts.

2
37	62
	62
	39
38	37
38