Playing Back CDs
This unit can play back audio CDs.
Loading a Disc
Program Play
You can arrange the order in which the tracks are played before you start playing. You can program up to 60 tracks.
1 In stop mode, press | PROGRAM |
PROGRAM. |
|
1 | Press CD/RANDOM to |
| RANDOM | ||
| CD | ||||
| select CD mode. |
| |||
|
|
|
|
| |
2 | Press 0 OPEN/CLOSE. |
|
|
| OPEN |
|
|
| |||
|
|
| |||
| The disc tray slides out. |
|
|
| |
|
|
|
| /CLOSE | |
The PROGRAM indicator starts blinking.
2 Press 4 or ¢ repeatedly to select the desired track.
SEARCH/TUNING
3 Load a disc with the label side facing up.
4 Press 0 OPEN/CLOSE to |
| OPEN |
| ||
close the disc compartment. |
| |
| /CLOSE | |
|
|
|
|
|
|
The total number of tracks and the playing time of the disc appear on the display.
Basic CD Operations
The current program number starts blinking.
3 Press PROGRAM to store | PROGRAM |
| |
the selected track. |
|
“00” and the next program number appear on the display.
4 Repeat steps 2 and 3 to store other tracks.
•You cannot program more than 60 tracks. If you attempt to do it, “FULL” will flash on the display.
To review the programed sequence |
|
|
Press PROGRAM repeatedly in stop mode. | PROGRAM | |
|
| |
The program number and track number |
|
|
|
| |
|
| |
are displayed in succession. |
|
|
To modify the program |
|
|
Press PROGRAM repeatedly to select | PROGRAM | |
|
| |
the program number with which you |
|
|
|
| |
|
| |
want to change the track, then repeat |
|
|
1 Press 3/8 to start playback.
The 3 indicator lights up and the track number and elapsed playing time of the current track appear on the display.
2 To stop playback, press 7.
To interrupt playback
Press 3/8.
The 3 indicator and the playing time start blinking.
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
steps 2 and 3 above. |
|
To play the programed tracks | PLAY/PAUSE |
Press 3/8. |
|
| |
|
•During program play, you can press 4 or ¢ to select the desired track in the program.
If you press REPEAT during program play The current track or all programed tracks are played repeatedly.
To resume playback, press 3/8 again.
To select a desired track
SEARCH/TUNING
Press 4 or ¢ repeatedly until the desired track appears on the display.
To search for a particular point during playback
Press and hold 4 or ¢ to locate the | SEARCH/TUNING | |
desired point. |
|
|
|
| |
To clear the program |
|
|
|
Press 7 in stop mode. | STOP/CLEAR | ||
The PROGRAM indicator disappears |
|
|
|
|
|
| |
|
|
| |
|
|
| |
from the display. |
|
|
|
•The stored program is cleared when the CD compartment is opened.
– 11 –