ProForm FTL59106.0 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 20

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic foot rails.

Make sure to bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than with your back. Raise the frame about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the latch pin is aligned with the hole in the center of the cushion. Slowly re- lease the latch knob. Make sure that the latch pin is fully inserted in the hole in the center of the cushion.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the latch pin is fully inserted in the hole in the center of the cushion.

1.Hold the upper ends of the handrails. Place one foot against one of the wheels.

2.Tilt the treadmill backward until it rolls freely on the front wheels. Carefully move the treadmill to the desired location.

To reduce the risk of injury, use extreme caution while moving the treadmill. Do not move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

Frame

Cushion

Engaged

Latch

 

Knob

 

Latch Pin

 

Handrail

Wheel

20

Image 20
Contents Call TOLL-FREE QUESTIONS?Model No. PFTL59106.0 Serial No Table of Contents Important Precautions Page Back Before YOU BeginRight Side Do not tighten the Upright Bolts yet AssemblyMake sure that the power cord is unplugged Do not tighten the Upright Bolts yet Tighten the Bolts yet See steps 2 and 4. Fully tighten the twoEndcap Screws Connectors are not Connected Page Small PRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeWhenkey. you are finished exercising, remove Follow your progress with the displayMeasure your heart rate if desired Insert the key fully into the console HOW to USE a Preset ProgramSelect one of the preset programs HOW to USE a Calorie Program Press the Start button to start the programFollow your progress with the display Information MODE/DEMO Mode Optional Chest Pulse SensorHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on Top Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page R0806B Key Qty DescriptionExploded Drawing A-Model No. PFTL59106.0 R0806B Exploded Drawing B-Model No. PFTL59106.0 R0806B Exploded Drawing C-Model No. PFTL59106.0 R0806B Exploded Drawing D-Model No. PFTL59106.0 R0806B Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty