ProForm 595Pi user manual Assembly, Make sure that the power cord is unplugged

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver	,
rubber mallet	, adjustable wrench	, and wire cutters	.

For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first check to see if it has been pre-assembled.To avoid damaging plastic parts, do not use power tools for as- sembly.

Nut (47)–4	1/4” Star Washer	Handrail Star	Upright Star	Frame Washer
	(21)–2	Washer (19)–4	Washer (39)–4
				(33)–2
Wheel Spacer (44)–4	Console	Silver Ground	3/4” Screw (2)–4	Endcap Screw
	Bolt (22)–2	Screw (27)–2		(95)–2
Wheel Bolt (89)–2			Upright Bolt (40)–4
Frame Bolt (32)–2			Handrail Bolt (20)–4

1.Make sure that the power cord is unplugged.

Have a second person hold the Upright Base (48) in the position shown, with the wheel holes at the top. Next, lo- cate the Left Upright (31), which has an identification sticker. Orient the Left Upright so the sticker is on the in- side as shown and the bracket is in the position shown.

Attach the Left Upright (31) to the Upright Base (48) with two Upright Bolts (40) and two Upright Star Washers

(39). Do not tighten the Upright Bolts yet. Note: There may be left and right stickers on the Upright Base.

1	Wheel Holes
	Bracket
	Sticker	48

31

39

40

6