SETTING THE TIME
Setting range: 0:00 to 23:59
1.Install the battery.
(Refer to “Battery Installation” on page 10)
The hour flashes on the display.
If the MEMO/▲ or SET Button is not pressed for 5 minutes, complete setting and display the number of steps and time.
2.Press the MEMO/▲ Button to advance by increments of one hour.
3.
4.
NOTE:
Press the MODE/EVENT button to return the hour to 0.
Press the SET Button to set the hour.
The minutes flash on the display.
Press the MEMO/▲ Button to advance by increments of one minute.
Press and hold the button to advance the time in 10 minute increments.
NOTE:
Press the MODE/EVENT Button to return the minute to 00.
12