Omron HJ-321 instruction manual Memory Function

Page 14

MEMORY FUNCTION

The unit stores 7 days of measurements for steps, distance, calories, aerobic steps and pitch.

The current day’s data is automatically stored in memory when the time reaches 12:00AM (0:00). The display will return to 0.

NOTE: • The time must be correctly set in the unit.

1Press to select the type of measurement you want to see (steps, distance, etc.).

2. Press to view the results (days 1-7) in memory.

The display changes with each press of as shown below.

• Keep pressed to automatically change the display until the current display is displayed.

NOTE: • If no button is pressed for more than 1 minute, the display will return to the current day’s data.

14

Image 14

Contents Pedometer Table of contents InTROduCTION Thank you for purchasing the Omron HJ-321 PedometerDamage to the equipment or other property Important Safety InformationCould result in death or serious injury Care and Maintenance Know Your Unit Holder Attach/remove the holderTotal distance = 320’’ 320 ÷ 10 = 32 inches 2 feet 8 inches Measure your stride length before setting the pedometerStride Length Measurement Press To select the mode Press to confirm the setting SettingsSetting the weight units Press and hold , orLb or kg fl ash on the display Setting the weightFollow the procedure from of Settings Using the Unit Reading the Current Display Press to change the displayAerobic steps Battery saving modeCalories PitchMemory Function Battery Life Battery Replacement Remove the battery with a toothpickInsert the battery CR2032 with the positive + side face up Do not use any abrasive or volatile cleaners Care and MaintenanceClean the unit with a soft dry cloth Do not immerse the unit or any of the components in waterDirections Troubleshooting TipsDevice error Specifications HJ-321 HJ-321-ZFCC Statement Limited Warranty Visit our web site at Call toll freeWest Field Court Made in China