Omron HJ-321 instruction manual Battery Replacement, Remove the battery with a toothpick

Page 16

BATTERY REPLACEMENT

1.Loosen the screw of the battery cover on the back of the unit. Remove the battery cover by pulling it off in the direction of the arrow.

Use the supplied screwdriver or use a small screwdriver to loosen the screw on the battery cover.

NOTE: Do not use a pair of metal tweezers or any metal object such as a small screwdriver.

CAUTION

Dispose of the device, battery, and components according to applicable local regulations. Unlawful disposal may cause environmental pollution.

CAUTION

Do not throw the battery into fire. The battery may explode.

Image 16

Contents Pedometer Table of contents InTROduCTION Thank you for purchasing the Omron HJ-321 PedometerCould result in death or serious injury Important Safety InformationDamage to the equipment or other property Care and Maintenance Know Your Unit Holder Attach/remove the holderStride Length Measurement Measure your stride length before setting the pedometerTotal distance = 320’’ 320 ÷ 10 = 32 inches 2 feet 8 inches Settings Setting the weight unitsPress To select the mode Press to confirm the setting Press and hold , orFollow the procedure from of Settings Setting the weightLb or kg fl ash on the display Using the Unit Reading the Current Display Press to change the displayBattery saving mode CaloriesAerobic steps PitchMemory Function Battery Life Battery Replacement Remove the battery with a toothpickInsert the battery CR2032 with the positive + side face up Care and Maintenance Clean the unit with a soft dry clothDo not use any abrasive or volatile cleaners Do not immerse the unit or any of the components in waterDevice error Troubleshooting TipsDirections Specifications HJ-321 HJ-321-ZFCC Statement Limited Warranty Visit our web site at Call toll freeWest Field Court Made in China