JVC FS-J60, FS-J50 manual Using the Timers, Using Daily Timer and Recording Timer

Using the Timers Continued

English

There are three timers available—Daily Timer, Recording Timer, and Sleep Timer.

Before using the timers, you need to set the unit’s clock (see page 9).

Using Daily Timer and Recording Timer

You can set the timer whether the unit is on or off.

How the timer actually works

When the on-time comes, the unit automatically turns on (the [timer] and the selected timer mode [DAILY or REC] indicators flash just before the on-time, and continue flashing while the timer is operating). Then, when the off-time comes, the unit automatically turns off (standby).

The timer setting remains in memory until you change it.

•When the DAILY indicator is lit on the display, the timer acts as the Daily Timer. Once the timer has been set, it will be activated at the same time everyday until the timer is turned off.

•When the REC indicator is lit on the display, the timer acts as the Recording Timer. After the timer-recording finishes, the details of the setting remain stored but the timer is turned off.

Before you start...

When using “ TUNER” as the source to play, make sure to select the desired station before turning off the power.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start over from step 1.

•For FS-J60 only, you can also use CLOCK/TIMER on the unit for this operation.

2 Set the on-time when you want the unit to turn on.

1)Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters off-time setting mode.

	UP
	CLOCK
	/TIMER
	DOWN
[DAILY	]

3 Set the off-time when you want the unit to turn off (standby).

1)Press UP or DOWN to set the hour, then press

CLOCK/TIMER.

2)Press UP or DOWN to set the minute, then press

CLOCK/TIMER.

The unit enters the timer selecting mode.

4 Press UP or DOWN to select the timer (Daily Timer or Recording Timer) with the source to play, then press CLOCK/TIMER.

•Each time you press UP or DOWN, the timer mode and the source change as follows:

DAILY TUNER REC TUNER

DAILY TAPE DAILY CD

1 Press CLOCK/TIMER.

The (timer) indicator lights up and the timer mode (DAILY or REC) indicator flashes on the display.

The unit enters on-time setting mode.

[DAILY ]

CLOCK /TIMER

DAILY TUNER: tunes in to the last station you were listening to. (Daily Timer)

REC TUNER: records the last station you were listening to. (Recording Timer)

• Put a recordable cassette into the deck.

DAILY CD: plays a disc. (Daily Timer)

• Load a disc.

DAILY TAPE: plays a tape. (Daily Timer)

•Make sure that a tape is in the cassette deck.

•Make sure that the tape direction is correct.

The unit enters the volume level setting mode.

20