ATTACHING THE CURL POST
Insert the Curl Post (7) into the Front Leg (3) and align the holes in the Front Leg and the Curl Post. Secure the Curl Post with a Curl Knob (24). Make sure that you fully tighten the Curl Knob.
STORING THE WEIGHT BENCH
To store the weight bench, first lay the Backrest (11) flat (see ADJUSTING THE BACKREST on page 10). Next, remove the indicated Curl Knob (24). Then, lift the Frame (1) to the position shown and tighten the Curl Knob into the indicated hole. Make sure that the Curl Knob is inserted through the Frame.
24 |
7 |
3 |
1 |
11 |
Hole |
24 |
11