ASSEMBLY
Make Assembly Easier
Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. However, it is important to realize that the versatile weight bench has many parts and that the assembly process will take time. Most people find that by setting aside plen- ty of time, assembly will go smoothly.
Before beginning assembly, carefully read the following information and instructions:
•Assembly requires two persons.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
•For help identifying small parts, use the PART IDENTIFICATION CHART.
In addition to the included hex key and grease packet, the following tools (not included) are required for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
Assembly will be more convenient if you have a socket set, a set of
1.Attach the Front Leg Foot (14) to the Front Leg
(3) with an M4 x 16mm Screw (32).
2.Attach the Frame (1) to the Front Leg (3) with two M8 x 81mm Button Bolts (47), a Short Support Plate (30), and two M8 Nylon Locknuts (34). Do not tighten the Nylon Locknuts yet.
Attach the Bumper (22) to the Frame (1) with two M4 x 16mm Screws (32).
1 |
|
|
| 3 |
|
| 14 |
|
| 32 |
|
2 |
|
|
| 47 |
|
| 1 | 22 |
|
| |
|
| 32 |
| 47 |
|
34 | 3 |
|
| 30 |
|
6 |
|
|