ProForm PFEX1995.1 user manual

Page 8

7.Connect the console wire harness to the Upper Wire Harness (36). Insert the console wire harness into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Round Head Screws (52).

8.Connect the Upper Wire Harness (36) to the Lower Wire Harness (8). Attach the Upright (13) to the Frame (1) with three M8 x 25mm Button Screws (33) and three M8 Split Washers (59). Be careful to avoid pinching the Wire Harnesses.

7

 

 

Console

 

Wire

 

Harness

52

16

 

 

36

 

13

8

 

 

13

 

36

33

8

33

59

59

 

 

1

33

 

8

Image 8
Contents Call TOLL-FREE QUESTIONS?Model No. PFEX1995.1 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Do not tighten the Button Bolts yet Batteries Tab Battery Door Page Page HOW to USE the Manual Mode HOW to Operate the Exercise CycleFeatures of the Console When you are finished exercising, the console If there are sheetsClear plastic on Metal contactsHOW to USE a Pulse Program Turn on the console. See on Select a pulse programBegin pedaling to start the program Monitor your progress with the display. See onHOW to USE a Preset Program Turn on the console. See on Select a preset programMaintenance and Troubleshooting Battery ReplacementHOW to Adjust the Reed Switch Handgrip Pulse Sensor TroubleshootingExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page R1007A Description QtyExploded DRAWING-Model No. PFEX1995.1 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty