ProForm PFEL87075 user manual Assembly, Resistance Cable 26 and the Sensor Wire

Page 6

ASSEMBLY

Assembly requires two people. Place all parts of the PROFORM¨ 485E in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

Assembly requires a phillips screwdriver , two adjustable wrenches , and a rubber

mallet .

1.Feed the console wire down through the Upright (3) as shown. While another person holds the Upright near the Frame (1), tie the console wire and the Sensor Wire (25) together as shown in drawing 1a. Next, connect the console wire to the Sensor Wire.

Gently pull the Resistance Cable (26) and the console wire out of the top of the Upright (3) until there is no slack between the Upright and the Frame (1).

Slide the Upright (3) onto the welded bolts on the Frame (1). Be careful to avoid pinching the

Resistance Cable (26) and the Sensor Wire (25).

Tighten a 3/8Ó Nylon Locknut (29) onto each welded bolt.

2.Feed the console wire back down into the Upright (3). Attach the Console (6) to the Upright with four #8 x 3/4Ó Round Head Screws (16). Be careful to avoid pinching the console wire.

Press the Resistance Knob (50) onto the Resistance Control (26).

1

 

 

Console

 

 

Wire

 

 

26

 

 

 

 

3

 

 

29

1a

 

 

Console

26

Console

Wire

 

Wire

 

 

 

1

 

 

 

25

25

 

 

2

 

 

6

 

50

 

 

 

 

Console

 

 

Wire

 

 

26

16

 

3

6

Image 6
Contents QUESTIONS? Model No. PFEL87075 Serial NoCustomer HOT Line Table of Contents Important Precautions Left Side Before YOU BeginFront BackPart Identification Chart Extra parts may be includedAssembly Resistance Cable 26 and the Sensor WirePage Batteries HOW to USE the PROFORM¨ 485E HOW to Exercise on the 485EHOW to Adjust the Resistance of the Pedals Battery Installation HOW to Operate the ConsoleDescription of the Console Maintenance Console TROUBLE-SHOOTINGStorage Exercise Intensity HOW to Measure Your Heart RateConditioning Guidelines Workout GuidelinesExercise Frequency Suggested StretchesPart LISTÑModel No. PFEL87075 Key Qty DescriptionExploded DRAWINGÑModel No. PFEL87075 HOW to Order Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT