ProForm PFEX1995.3 user manual

Page 8

7.Connect the console wire harness to the Upper Wire Harness (36). Insert the console wire harness into the Upright (13). Attach the Console (16) to the Upright with four M4 x 16mm Round Head Screws (52).

8.Connect the Upper Wire Harness (36) to the Lower Wire Harness (8). Attach the Upright (13) to the Frame (1) with three M8 x 25mm Button Screws (33) and three M8 Split Washers (59). Be careful to avoid pinching the Wire Harnesses.

	7
		Console
		Wire
		Harness
	52	16
		16
		36
		13
	8
		13
		36
	33	8
	33	33
	59	33
	59	59
		59
		1
	33

8

Image 8

Contents Call TOLL-FREE QUESTIONS?Model No. PFEX1995.3 Serial No Table of Contents Important Precautions Before YOU Begin Assembly Page Batteries Tab Battery Door Page Page HOW to Operate the Exercise Cycle HOW to Adjust the SeatHOW to USE the Manual Mode Diagram of the ConsoleFeatures of the Console Cals to clean the contacts When you are finished exercising, the consoleFollow your progress with the display Cloth never use alcohol, abrasives, or chemiBegin pedaling to start the program HOW to USE a Preset ProgramTurn on the console. See on Select a preset program Maintenance and Troubleshooting Battery ReplacementHOW to Adjust the Reed Switch Handgrip Pulse Sensor TroubleshootingExercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencySuggested Stretches Page R1107A Description QtyExploded DRAWING-Model No. PFEX1995.3 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty