Citizen Systems TW610 instruction manual How to change the battery, Open the battery cover

Page 19

How to change the battery

1 Open the battery cover.

• Toremovethebatterycover, turn the screw in the cover counterclockwise using the provided screwdriver (small screwdriver).

2 Remove the old battery and insert a new battery. Packing

• Insert the battery with the positive pole (+) facing upward.

3 Close the battery cover.

•Insert the claw on the battery cover into the main unit, press the cover down and turn the screw in a clockwise direction.

•When you close the battery cover, make sure that the rubber seal is not protruding from the groove.

Claw

4 Press the reset button.

• Insert a toothpick or similar object into the hole and press the reset button.

5Perform initialization.

•Follow the initialization procedure. (See page 6)

19

Image 19

Contents For Digital Pedometer Model TW610 Contents Safety precautions About handling Precautions for handling and storageFeatures What to do ﬁrst Before using this productInitialization Turn on the powerSet your weight Initializing the productSet your target number of steps Set your stride lengthSet the date and time To redo Let’s walk How to attach the strapFor correct measuring Standard display Method of operationHow to read the data How to read the accumulated data How to read the memory dataStart sectional measuring Sectional measuringTo view the results of sectional measuring To end sectional measuringChecking the date ResetWhen the battery is low About the batteryOpen the battery cover How to change the batteryTroubleshooting No steps have been counted What is an amount of exercise? To 8 on a scale SpeciﬁcationsYear Limited Warranty Page Page