Sleep Timer Sleep, Adjusting the sound | JVC TH-C60, TH-C50, TH-C40

Basic operations

See page 16 for button locations.

Sleep Timer [SLEEP]

The system turns off automatically when the specified period of time has passed.

Press SLEEP.

Each time you press the button, the shut-off time changes as follows:

– – (off) Z 10 Z 20 Z 30 Z 60 Z 90 Z 120 Z 150 Z

(back to the beginning)	(Unit: min.)
Example:
	minutes

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly.

To cancel

Press SLEEP repeatedly until “SLEEP – –” appears.

• Turning off the power also cancels the Sleep Timer.

Adjusting the output level of the subwoofer and speakers

1Press SPK LEVEL to show the target speaker indication on the display

window.

Each time you press the button, the indication of the speakers changes as follows:

FRNT L (Front Left speaker) Z FRNT R (Front Right speaker) Z CENTER (Center speaker) Z SURR L (Surround Left speaker) Z SURR R (Surround Right speaker) Z SUBWFR (Subwoofer) Z (back to the beginning)

2Press LEVEL +/– to adjust the output level from –6 to +6.

NOTE

•You can also make adjustments by using the setup menu shown on the TV screen. (See page 35.)

•The adjustments take effect for all sources.

Adjusting the sound

1Press TREBLE/BASS to show “TRE” or

“BASS” on the display window.

Each time you press the button, the indication alternates between “TRE” and “BASS”.

•TRE: Select this to adjust treble sound.

•BASS: Select this to adjust bass sound.

2Press LEVEL +/– to adjust the level from

– 10 to +10 (in 2 steps).

NOTE

• The adjustments take effect for all sources.

Changing the scan mode

The system can be accommodated to your TV’s scan mode.

NOTE

•To use the system in the progressive mode, it is required that the center unit is connected to the TV by using an HDMI cable or a component video cord (not supplied). (See page 12.)

7 While DVD or USB MEMORY is selected as the source and stopped

1 Press and hold SCAN MODE for

2 seconds.

Currently selected scan mode appears on the display window.

2 Press Cursor 3/2to select the desired mode.

Each time you press the button, the scan mode changes as follows:

7When connecting the TV with the component video cord:

480i* mZ480p*

7When connecting the TV with the HDMI cable:

AUTO Z 480p* Z 1080i* Z 720p* Z (back to the beginning)

•When selecting “AUTO”, the system outputs the video signal to get the best picture quality on your TV according to the High-Definition video signal compatibility of the TV.

•When selecting “AUTO”, “1080i”, or “720p”, the system up-convert the 480i or 480p signal to 1080i or 720p.

•When “1080i” or “720p” is selected, the HD indicator lights on the display window.

* 480i, 480p, 1080i, and 720p indicate the number of scanning lines and scanning format of a video signal.

–480i/1080i indicates 480/1080 scanning lines with interlaced format.

–480p/720p indicates 480/720 scanning lines with progressive format.

•Generally, you can get better picture quality by selecting the larger the number of scanning lines.

•You can get better picture quality in the progressive mode than in the interlace mode.

3Press ENTER while the selected mode is

displayed.

When the progressive mode is selected, the PROGRESSIVE indicator lights on the display window.

NOTE

•Changing the scan mode does not take effect when connecting the TV with the S-video or the composite video cord.

•Although the picture may be distorted when you press ENTER, this is not a malfunction of the system.

•There are some progressive TVs and High-Definition TVs that are not fully compatible with this system, resulting in an unnatural picture when playing back a DVD VIDEO in the progressive scan mode. In such a case, change the scan mode to the interlace mode. To check the compatibility of your TV, contact your local JVC customer service center.

•All JVC progressive TVs and High-Definition TVs are fully compatible with this system.